VICTRON GlobalLink 520 Monitoring Device
Article Number
47767
EAN
8719076053644
Model no.
ASS030543020
Description
VICTRON - GlobalLink 520
SVB recommends the following for this item
Product details
Trust is good, control is better
The GlobalLink 520 from VICTRON allows you to keep track of your installations on your boat - wherever you are. Monitor your Victron devices as well as alarms via the 4G-LTE-M celular technology, for example for bilge pumps, smoke detectors or burglar alarms. The GlobalLink 520 is equipped with a 4G-LTE-M card that automatically connects to a local cellular network. The monitoring system therefore does not require a Wifi connection. After installation, the 4G-M card is valid for five years with no additional costs or monthly fees. At the end of the five years, it can be extended for five more years or any prepaid 4G-M SIM card can be used.
Compatible with the 4G LTE-M network
LTE-M is a short form of LTE Cat-M1 or Long Term Evolution (4G), category M1. This wireless technology is designed to connect Internet of Things (IoT) devices to existing 4G wireless stations at low power consumption. LTE-M supports handover and roaming, so the device can be used in mobile vehicles such as boats and campers. Check your GlobalLink 520 manual to see if LTE-M availability has been officially confirmed in your area. Coverage is increasing week by week as local providers provide support. Included with your purchase is 5 years of connectivity, so you don't need to buy a separate data package or SIM card. For more information regarding LTE-M network coverage, please visit: https://1nce.com/en/coverage/
Note: Please note that only 4G LTE-M SIM cards can be operated with the Victron GlobalLink 520. Regular 4G LTE SIM cards are not compatible with the device.
Easy to install
The GlobalLink 520 unit is very easy to install. Two communication ports allow for connecting up to two VE.Direct devices, such as a battery monitor, smart shunt or MPPT solar charge controller directly via a cable. Just plug in and you're done. State of charge, voltage, and battery consumption data is updated every 15 minutes. Two digital inputs act as pulse counters, and a remote controllable relay can be used to monitor other installations on your boat, such as a smoke detector, automatic bilge pump or burglar alarm. Once a pulse is triggered, you will be notified. If you want, even by e-mail.
VICTRON Remote Management (VRM)
The monitoring module comes with a built-in antenna designed for use around the globe. Depending on where you install the GlobalLink 520 on your boat (or camper), reception may be too weak. In such cases, it is also possible to mount an external antenna easily on the top of the unit.
Signal strength can be checked via Victron Remote Management (VRM). You can access your data via VRM - from anywhere and at any time. Check the status of your connected products, view detailed history graphs, generate detailed analytical reports, and even configure automatic alarms.
Delivery includes a 1.5 m mains cable with inline fuse holder (1 A), M10 cable lugs and mains plug.
Technical data
The GlobalLink 520 from VICTRON allows you to keep track of your installations on your boat - wherever you are. Monitor your Victron devices as well as alarms via the 4G-LTE-M celular technology, for example for bilge pumps, smoke detectors or burglar alarms. The GlobalLink 520 is equipped with a 4G-LTE-M card that automatically connects to a local cellular network. The monitoring system therefore does not require a Wifi connection. After installation, the 4G-M card is valid for five years with no additional costs or monthly fees. At the end of the five years, it can be extended for five more years or any prepaid 4G-M SIM card can be used.
Compatible with the 4G LTE-M network
LTE-M is a short form of LTE Cat-M1 or Long Term Evolution (4G), category M1. This wireless technology is designed to connect Internet of Things (IoT) devices to existing 4G wireless stations at low power consumption. LTE-M supports handover and roaming, so the device can be used in mobile vehicles such as boats and campers. Check your GlobalLink 520 manual to see if LTE-M availability has been officially confirmed in your area. Coverage is increasing week by week as local providers provide support. Included with your purchase is 5 years of connectivity, so you don't need to buy a separate data package or SIM card. For more information regarding LTE-M network coverage, please visit: https://1nce.com/en/coverage/
Note: Please note that only 4G LTE-M SIM cards can be operated with the Victron GlobalLink 520. Regular 4G LTE SIM cards are not compatible with the device.
Easy to install
The GlobalLink 520 unit is very easy to install. Two communication ports allow for connecting up to two VE.Direct devices, such as a battery monitor, smart shunt or MPPT solar charge controller directly via a cable. Just plug in and you're done. State of charge, voltage, and battery consumption data is updated every 15 minutes. Two digital inputs act as pulse counters, and a remote controllable relay can be used to monitor other installations on your boat, such as a smoke detector, automatic bilge pump or burglar alarm. Once a pulse is triggered, you will be notified. If you want, even by e-mail.
VICTRON Remote Management (VRM)
The monitoring module comes with a built-in antenna designed for use around the globe. Depending on where you install the GlobalLink 520 on your boat (or camper), reception may be too weak. In such cases, it is also possible to mount an external antenna easily on the top of the unit.
Signal strength can be checked via Victron Remote Management (VRM). You can access your data via VRM - from anywhere and at any time. Check the status of your connected products, view detailed history graphs, generate detailed analytical reports, and even configure automatic alarms.
Delivery includes a 1.5 m mains cable with inline fuse holder (1 A), M10 cable lugs and mains plug.
Technical data
- Voltage: 8 - 70 V DC
- Power consumption
- Closed relay: 20 mA @ 12 V / 10 mA @ 24 V
- Open relay: 40 mA @ 12 V / 20 mA @ 24 V
- Dimensions (WxHxD): 123 x 67 x 23 mm
- Hole diameter: 3.5 mm
- Compatible with 4G-M SIM cards
Documents
Similar items
-8%
MASTERVOLT
Temperature Sensor for ChargeMaster (+) / CombiMaster / MassCombi Ultra/Pro
€50.35
only
€46
18
3
NEW
STERLING
Bidirectional B2B Charger Remote Control
only
€105
00
7
NEW
DIGITAL YACHT
veKonvert Victron VE.Direct to NMEA2000 Gateway / Micro-C
€190.00
only
€176
43
-7%
VICTRON
Color Control GX Display Remote Control
€462.00
only
€428
53
1
-7%
VICTRON
AC Power Cord for Smart IP43 / Phoenix Chargers
€9.00
only
€8
36
25
CRISTEC
Connection Kit for Parallel Operation of two HPower Chargers
only
€46
18
2
CRISTEC
DC Output Connector for all 60 A YPower chargers
only
€54
58
7
CRISTEC
DC Output Connector for all YPower chargers except 60A
only
€21
81
7
WAGO WINSTA AC Input Connector for YPower chargers
only
€11
72
13
CRISTEC
Battery Temperature Sensor Probe / cable length: 5 m
only
€47
86
3
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!