VICTRON ARGO FET Battery Isolator / MOSFET / 100A / 2 battery banks

These charging current distributors use modern MOSFET technology instead of traditional diodes, which allows you to charge two or three batteries simultaneously and with virtually no voltage loss. The voltage drop is less than 0.02 V at low currents and only 0.1 V at higher currents. The ARGO FET charging distributors also have a control input for supplying voltage to alternators which require a battery voltage for starting at B+. Suitable for 12 and 24 volt systems.

On-board installations often comprise two or more battery groups, such as starter battery, supply battery and/or batteries for bow thrusters and navigation equipment. Here it is important that these individual battery groups do not interfere with each other and are insulated. This, of course, means that the charging system must also be isolated. However, this makes the charging process more complicated, as either the alternator, the generator or the charger has to recharge the batteries one by one. When choosing isolating diodes/relays, always keep in mind the maximum possible charging current. For example, if your alternator has 50-70 amps output, a 70 amp isolating diode will be enough.

Connection example
Technical data

Max. charging current	100 A
Number of batteries	2
Connection	M8 bolts
Weight:	1.4 kg
Dimensions (HxWxL)	65 x 120 x 200 mm