VDO VERATRON VL Flex Gauge / NMEA2000 / white
VDO VERATRON VL Flex Gauge / NMEA2000 / black
The VL Flex gauge has a 1.44" TFT display and can show analogue as well as digital data. The display supports a variety of configurations, such as engine speed, boat speed or level values, and can be set up in a single or dual layout. Colour: black.
Product details
- Engine data (engine speed, operating hours, cooling water temperature, boost pressure, oil temperature, oil pressure, gear oil temperature, gear oil pressure)
- Battery data (voltage, current, state of charge, battery temperature)
- Speed overground (SOG)
- Depth
- Time (via GPS)
- Fuel tank level
- Fresh water level
- Waste water level
- Trim position
- Rudder position
The VL Flex gauge has a 1.44" TFT display and can show analogue as well as digital data. The display supports a variety of configurations, such as engine speed, boat speed or level values, and can be set up in a single or dual layout. The display can be connected to an NMEA2000 network via the wiring harness. Analogue sensors and power supply connected via open stranded wires.
Configuration is quick and easy via smartphone using the "VL Flex Configurator" app (AppStore and Google Play). All you have to do is hold your smartphone near the display.
Supported configurations
Engine Speed, Boat Speed, Ammeter, Voltmeter, Battery SOC, Battery SOH, Rudder Angle, Battery Temperature, Battery Autonomy, Engine Hours, Speed Over Ground, Boost Pressure, Depth, Clock, Fuel Level ,Fresh Water Level, Waste Water Level, Trim Position, Coolant Temperature, Oil Pressure, Oil Temperature, Gear Oil Pressure, Gear Oil Temperature
Installation
- Installation diameter:
- 48.1 mm (flush mount)
- 53 mm (mounting with spinlock)
- Suitable panel thickness:
- 1.5 - 3 mm (flush mount)
- 0.5 - 20 mm (mounting with spinlock)
Wiring guide
- Red = Battery 12/24 V
- Black = Earth
- Green/Red = Frequency sensor signal
- Yellow/Red = Resistance sensor signal
- Blue/White = LIN Bus
- Red/white = lighting day/night
Technical Data
Display | 1.44" TFT colour display |
Screen resolution | 125x125 px |
Voltage | 8-32 V (12/24 V) |
Power consumption (amps) | 50 mA @ max. illumination |
Operating temperature | -20 to +70 °C |
Storage temperature | -30 to +80° C |
Analogue inputs | Resistive: 0-400 Ω Frequency: W, Ind, Hall, Generator |
Digital inputs | NMEA2000, LIN Bus |
Wireless interface | NFC |
Diameter | 52 mm |
Material | Polycarbonate |
Protection category | IP67 |
Colour | White |
Included in delivery | Display VL Flex, wiring harness, mounting spinlock and documents |
Documents
Similar items
Comparison with other products
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .