VERATRON Push Button for VL Flex IBM Display
Reset image position
VERATRON - Push button for VL Flex IBM display
Push button to fit the VL Flex IBM gauge from Veratron. With each press of the button, the screen changes to the next layout and thus displays the next set of readings. The button can be connected directly to the display's wiring harness. O-ring seal and fastening nut (spanner size 14) included.
- Required installation hole Ø: 12 mm
(Button with symmetrical (double-sided) anti-rotation protection, button width here 10.5 mm)
- Suitable for wall thickness of 4 mm
- Maximum push-button top Ø: 17.5 mm
- Installation height (above the panel) 7 mm
- Installation depth (measured from top of panel) 12 mm
VICTRON VE.Bus Cable
from €15 08 €16.99
VDO VERATRON Intelligent Battery Sensor IBS / 24V / 255A / NMEA2000
only €299 58
VDO VERATRON Intelligent Battery Sensor IBS / 12V / 500A / NMEA2000
only €222 65
VDO VERATRON Intelligent Battery Sensor IBS / 12V / 250A / NMEA2000
only €199 58
MASTERVOLT Plug for MLI Ultra Lithium Ion Battery / waterproof
only €10 88
SIMARINE Tilt Sensor / Inclinometer
only €78 11 €84.35
VICTRON Temperature Sensor
only €28 53 €32.99
from €14 24 €16.00
VICTRON VE.Can to NMEA2000 Micro-C Adapter Cable
only €89 87 €104.99
SIMARINE SN01 NMEA2000 Gateway Module
only €140 29
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: firstname.lastname@example.org or by phone on: +49 (0)421 57290510 .
What is the diameter of the hole needed for this switch?
The needed mounting hole diameter is 12 mm.