TRICOMBO LED-Bulb for Navigation Lights with BAY15s
This product is no longer available.
Product details
This multivolt LED bulb enables an existing light to be used as a navigation light, with three different lighting modes: 360° anchor light (white), 3-colour light (white, red, green) and SOS flashing light. The existing wiring can still be used, since the lighting modes are selected by switching the unit off and on.
The TRICOMBO LED bulb also has an integrated brightness sensor, which automatically switches on the anchor light in the dark and switches it off during daylight.
If the light holder of the existing anchor light is not exactly aligned with the bow/stern axis, the innovative design allows for 3-colour operation.
Multivolt: 10-30 V DC, polarity free. Socket: BAY15s.
Selecting different lighting modes while in operation
Technical specifications:
Notes:
Brightness sensor
As a rule of thumb, all assembly and functional tests should be carried out during daylight.
Consider the brightness sensor. The anchor light only works in the dark!
It may be necessary to cover the sensor on the top of the light with a opaque adhesive strip, in order to conduct the functional test. Do not forget to remove it after finishing the functional tests.
Align the illuminant for 3-color operation
Don't worry if the light holder of the existing anchor light is not exactly aligned to the bow / stern axis of your boat. With just a few simple turns, the light can be adjusted for the 3-color operation:
Plug the bulb into the light holder and see if the red / green separation is exactly on the bow / stern axis of the boat. Note the misalignment, remove the illuminant from the anchor light, loosen the 3 screws on the underside and twist the upper part of the light on the base to the required degree. Fasten the screws, re-insert the illuminant into the anchoring light and check whether the setting was successful or if a small adjustment is necessary. That's it!
General:
This LED insert meets the requirements of COLREG72 and of EN14744 and EN60945, but is not yet internationally approved.
The TRICOMBO LED bulb also has an integrated brightness sensor, which automatically switches on the anchor light in the dark and switches it off during daylight.
If the light holder of the existing anchor light is not exactly aligned with the bow/stern axis, the innovative design allows for 3-colour operation.
Multivolt: 10-30 V DC, polarity free. Socket: BAY15s.
Selecting different lighting modes while in operation
- After switching on, the LED bulb functions as a 360° anchor light, approx. 1 W
- Switch off and immediately on again during operation: 3-colour mode is activated, approx. 0.7 W
- Switch off and then on after 3 seconds during operation: SOS flashing light is activated, approx. 4 W
- Switch off during and after > 5 seconds: 360° white anchor light is activated, approx. 1 W
Technical specifications:
- Operating voltage: Multivolt, polarity-free, suitable for 12 and 24 volts
- Power consumption (@ 12V)
- Anchor light: approx. 1 W
By daylight sensor deactivated: 0.05 W - 3-color lantern: approx. 0.7 W
- SOS flashing light: approx. 4 W
- Base BAY 15s (bayonet locking with one pin)
- Luminaire top / base alignment adjustable
- Total height: 60 mm
- Diameter top: 35 mm
- Base diameter: 15 mm
- Anchor light: approx. 1 W
Notes:
Brightness sensor
As a rule of thumb, all assembly and functional tests should be carried out during daylight.
Consider the brightness sensor. The anchor light only works in the dark!
It may be necessary to cover the sensor on the top of the light with a opaque adhesive strip, in order to conduct the functional test. Do not forget to remove it after finishing the functional tests.
Align the illuminant for 3-color operation
Don't worry if the light holder of the existing anchor light is not exactly aligned to the bow / stern axis of your boat. With just a few simple turns, the light can be adjusted for the 3-color operation:
Plug the bulb into the light holder and see if the red / green separation is exactly on the bow / stern axis of the boat. Note the misalignment, remove the illuminant from the anchor light, loosen the 3 screws on the underside and twist the upper part of the light on the base to the required degree. Fasten the screws, re-insert the illuminant into the anchoring light and check whether the setting was successful or if a small adjustment is necessary. That's it!
General:
This LED insert meets the requirements of COLREG72 and of EN14744 and EN60945, but is not yet internationally approved.
Documents
Short manual
PDF, 43,17 KB
Test
PDF, 1,64 MB
Customers also bought
ANTAL
Friction Rings without Rope Strop
from
€15
08
5 variants
-14%
MAESTRINI
Hose Connection / Male, Brass CR
€3.31
from
€2
86
11 variants
-10%
YACHTCARE
LEAK HERO Sealant / 625 ml
€33.45
only
€30
21
> 100
Manual Signal Horn
only
€8
36
27
-8%
YACHT DEVICES
NMEA2000 Engine Gateway YDEG-04N
€229.08
only
€210
04
18
GLEISTEIN
DOCK-TWIN Mooring Line / navy blue
from
€2
18
5 variants
CEE Extension Cable / rubber sheath / 3-pin / black
from
€38
61
2 variants
Similar items
G4 LED Bulb / 10-30 V / cold white
only
€7
14
8
G4 LED Bulb / 10-30 V / warm white
only
€7
14
> 100
G4 LED Bulb / warm white / 120 lumens
only
€6
30
> 100
G4 MINIATURE LED-Insert / cold white
only
€5
46
46
Sealed Beam LED Reflector
only
€27
69
24
Replacement Bulb for LED Flush Mount Lamp
only
€12
56
9
LED Bulb G4 warm white
only
€7
52
> 100
G4 LED Bulb / warm white / 240 lumens
only
€7
98
> 100
Spare LED Bulb 9D
only
€7
52
> 100
G4 LED Illuminant / cold-white/blue
only
€8
36
> 100
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!