Indoor fluorescent light with two tubes for fixed installation. On/off switch with 2 brightness settings (tube 1 or tube 1 +2 can be selected). The tubes are covered with a clear coating.
- Voltage: 12 volts
- Connection: 2-strand wire with cigarette lighter plug
- Power consumption: 0.5/0.9 Amps
- Output: 2 x 8 Watt
- Dimensions: L 355 x H 40 x W 60 mm
- Distance between fixing holes: 200 mm
The light can be connected to a 12 volt on board system. This unit doesn't have polarity protection.
Manufacturer produced connecting lines are made with different colors or codes, therefore general polarity indication isn't evident.
The correct polarity connection is achieved by following these steps:
- Unscrew the cigarette lighter plug
- Check the markings and colors of the connecting lines
- The leading middle contact connecting line is POS 12 volt.
Don't forget to install a fuse on the POS-wire.
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: firstname.lastname@example.org or by phone on: +49 (0)421 57290510 .