Instructions for using the cleaner
Wet the surface with fresh water prior to cleaning. Apply the cleaner and work in evenly. We recommend working into the surface with a soft brush going across the grain. Rinse off the soapy water with fresh water.
Subsequent cleaning may be necessary in the case of extremely dirty surfaces prior to using the brightener.
Instructions for using the brightener
The product should be applied immediately following cleaning. Apply the brightner sparingly and evenly in order to prevent patches and wash the area afterwards. The brightener starts to work immediately and the results can be seen in no time. Rinse the solution with plenty of fresh water.
The product is neither corrosive nor aggressive and does not damage rubber seals, paintwork or fittings. After drying, the surface should be treated with a suitable sealer.
Please note the following hazard warnings:
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: email@example.com or by phone on: +49 (0)421 57290510 .