57 in stock
SVB price: €20.97 (€4.19 / l )
You save: 44%
€37.67
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
pcs.
€20.97 This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
Buy
Item no.
48705
EAN
8711497590760
Description
Talamex - ANTIFREEZE frost protection
Contents
5 l

Product details

Keeping your cooling system intact protects your motor from overheating during use. However, in the winter, the engine cooling system itself needs to be protected from frost, to prevent cracks and corrosion. In winter storage, there is no circulation of the cooling system and air can enter pipes and reach internal components on the engine, which are then susceptible to corrosion and oxidation. Protecting the engine with antifreeze is therefore extremely important. ANTIFREEZE provides effective protection against frost and also inhibits corrosion and rust.

Your engine and pipes are not the only components that are protected with ANTIFREEZE from Talamex over winter. It also protects your drinking water and grey water systems, as well as your on-board toilet. ANTIFREEZE protects copper pipes from bursting down to temperatures of -45 °C, PVC pipes to -25 °C. Does not corrode seals and hoses.

The plant-based antifreeze is biodegradable and environmentally friendly.

Properties
  • Frost protection for a range of uses (engine, lines, drinking water systems, grey water systems, on-board toilet, copper and PVC pipes)
  • Protection against corrosion and oxidation
  • Biodegradable
  • Compatible with all materials

How to use

Water systems
  1. Drain water completely. Make sure all hot and cold water taps are open. Use compressed air to clear if neccessary.
  2. Drain the hot water tank, leave the vent valve open after draining.
  3. Connect the inlet and outlet pipes of the hot water tank (e.g. with fittings or hose clamps).
  4. Add undiluted antifreeze to the system.
  5. Pressurise the system using water pump.
  6. Open all the taps, starting with the one furthest away, and let the antifreeze flow until visible. Then close the outlet opening.
  7. Make sure that the toilet and the cistern are completely empty (flush several times!).
  8. Ensure that the waste water system contains sufficient antifreeze.
  9. In spring, flush the entire system for at least half an hour until the red coloured water is clear and clean again.

Engine systems
  1. Drain the coolant (see the operating instructions for the engine).
  2. Fill the cooling system with the undiluted antifreeze.
  3. Drain antifreeze completely before starting the engine.

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Hazard warnings
Contains (name of sensitising substance). May produce an allergic reaction.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
EUH208, P101, P102, P103

Documents

en-flag Safety datasheet
PDF, 284,90 KB
de-flag Safety datasheet
PDF, 300,34 KB
fi-flag Safety datasheet
PDF, 235,72 KB
fr-flag Safety datasheet
PDF, 292,74 KB
nl-flag Safety datasheet
PDF, 290,34 KB
se-flag Safety datasheet
PDF, 237,59 KB

What other SVB customers have to say

100% real reviews

2 customer reviews

Didier D.
Flag of France Verified purchase
wintering
Kay K.
Flag of Germany Verified purchase
antifreeze
Water tanks and pipes.Engine

Rate product

How would you rate this product?
Disappointed
Completely fails to meet my expectations
Poor
Only some expectations are met
OK
Meets my basic expectations
Good
Slightly better than my general expectations
Excellent
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

No questions asked yet. Be the first to ask a question!