7 left in stock
pcs.
SVB price: €158.82
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
pcs.
€158.82 This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
Buy
Available variants:
Image of TOUGH 55 W Solar Panel / FLUSH

SUNBEAM TOUGH 55 W Solar Panel / FLUSH

SUNBEAMsystem Tough Flush (TF) solar modules are a reliable source of energy even under the harshest conditions thanks to the highly efficient SUNPOWER cells (22.5% efficiency). Because there is no junction box, the semi-flexible flush modules, which are only...

Image of TOUGH 78 W Solar Panel / FLUSH

SUNBEAM TOUGH 78 W Solar Panel / FLUSH

SUNBEAMsystem Tough Flush (TF) solar modules are a reliable source of energy even under the harshest conditions thanks to the highly efficient SUNPOWER cells (22.5% efficiency). Because there is no junction box, the semi-flexible flush modules, which are only...

Image of TOUGH 21 W Solar Panel / FLUSH

SUNBEAM TOUGH 21 W Solar Panel / FLUSH

SUNBEAMsystem Tough Flush (TF) solar modules are a reliable source of energy even under the harshest conditions thanks to the highly efficient SUNPOWER cells (22.5% efficiency). Because there is no junction box, the semi-flexible flush modules, which are only...

Image of TOUGH 111 W Solar Panel / FLUSH

SUNBEAM TOUGH 111 W Solar Panel / FLUSH

SUNBEAMsystem Tough Flush (TF) solar modules are a reliable source of energy even under the harshest conditions thanks to the highly efficient SUNPOWER cells (22.5% efficiency). Because there is no junction box, the semi-flexible flush modules, which are only...

Item no.
24285
EAN
00663185777466
Model no.
T-38X53-H
Description
SUNBEAM Solar panel T37F
Construction type
Semi-flexible
Nominal Power @ 12 V
37 W
max. Power Current (Imp)
1.99 A
max. Power Voltage (Ump)
18.57 V
Short circuit current (Isc)
2.11 A
Open circuit voltage (Uoc)
21.77 V
Connector
None
Attachment
Adhesive, Loops
Module connection
Rear side
Connector cable
Flat cable (2-core)
Walkable
Yes
Length
53.5 cm
Width
37.8 cm
Height
3 mm

SVB recommends the following for this item

Product details

SUNBEAMsystem Tough Flush (TF) solar modules are a reliable source of energy even under the harshest conditions thanks to the highly efficient SUNPOWER cells (22.5% efficiency). Due to their impressive technical properties, the Tough-Flush modules are often used in the yacht and caravan sector, as well as in private and industrial off-grid systems.
The surface of these modules is extremely durable and resistant to high UV radiation. The material has a better light transmission than conventional materials. When partially shaded, the physical cell arrangement ensures a higher output power than other modules. The surface structure improves power generation at low light incidence angles and has anti-slip properties. Assembly is extremely easy. The modules can be glued with SIKA 291 and / or screwed using existing stainless steel eyelets.

Special features of this module type
The semi-flexible flush modules, which are only 3 mm thin, feature no obstacles or tripping hazards on the module surface because there is no junction box. This is the only type of module that can be mounted almost flush with the surface (flush mount)!
Electrical connection from the back of the module is via an inconspicuous flat, white double-webbed cable (2x 1.6 mm²/approx. 1000 x 5.5 x 2.5 mm) and the cable can be attached almost invisibly next to the module on white surfaces/mounting surfaces.

Details at a glance
  • Semi-flexible
  • High level of efficiency
  • Durable and UV-resistant
  • Small size & high performance
  • Improved yield in partially shaded areas
  • Yield enhancing, anti-slip surface structure
  • Flush mounting (no annoying connection box on the module surface)

Special technical feature of flush modules
Because the connecting cables of the flush modules run directly out of the back of the module, there are no integrated blocking / bypass diodes on these modules. (For modules with a connection box, these are usually integrated in the connection box.)

Bypass / blocking diodes
Use bypass / blocking diodes if necessary (in accordance with the installation instructions). The F1200D Schottky diode (12A / 200V) is suitable for 5 - 350 Wp modules and is available from electronics retailers or from us on request.
To install, the module connection cables must be routed to a dry installation area and, together with the diode, mounted on suitable terminal blocks, e.g. item 47023. With powerful modules, "in-line" installation is not advisable, as the diodes can become quite warm when the module is shaded.
Make sure that the diodes have the correct polarity! A ring or point on the diode housing marks the cathode. This must be connected to the PLUS connection of the module.
Important: Incorrect or reverse polarity connected diodes can damage the solar module.

Technical data
Type T37F
Max. power (Pmax) 37 W
Open circuit voltage (Uoc) 21.77 V
Short circuit current (Isc) 2.11 A
Nominal voltage (Ump) 18.57 V
Nominal current (Imp) 1.99 A
Weight: 0.7 kg
Dimensions (L x W x H) 535 x 378 x 3 mm

Installation instructions
  • Do not use modules> 50 W on a soft surface.
    SUNBEAM Tough Flush (TF) solar modules with greater than 50 watts of power are designed for permanent installation on a solid surface. Mounting can be done by gluing or screwing.
  • For mobile or temporary use, modules up to 50 W and a fixed connection box are more suitable, such as the SUNBEAM T54QF.
  • The maximum permissible warpage of the TF modules during installation is 30°/m.
    This results in a maximum warpage of 16 mm for the T37F.

Documents

en-flag Manual
PDF, 1,23 MB

What other SVB customers have to say

100% real reviews

6 customer reviews

4 (out of 6 ratings)
3 Stars
(0)
2 Stars
(0)
Jörgen P.
by Jörgen P. Flag of Germany 12/23/2023 Verified purchase in use on a Najad AB N 360
Solar panels
Fast and professional support in implementing tax exemption for solar systems on yachts.
The solar panel is used as a replacement on our N 360 for the one installed in 2001. Even if the power of the panel seems very small at 37 watts, it is a good support for maintaining the battery charge while lying down. While sailing, the consumption of the navigation instruments is compensated.
Reinhard W.
by Reinhard W. Flag of Germany 12/1/2020 Verified purchase
Sehr gut
Good solution
Marc L.
by Marc L. Flag of France 5/2/2018 Verified purchase
I installed 2 T30F panels (glued to the deck) last week. Very satisfied at the moment. Production of approximately 2A between the 2 panels (the backstay provides some shade).
View all ratings

Rate product

How would you rate this product?
Disappointed
Completely fails to meet my expectations
Poor
Only some expectations are met
OK
Meets my basic expectations
Good
Slightly better than my general expectations
Excellent
Fully exceeds my expectations
Click on the stars to rate

Comparison with other products

1
This product
2
3
4
5
Item no.
24285
24286
24287
24284
24288
Customer ratings
(6)
(4)
(1)
(2)
(1)
Description
SUNBEAM Solar panel T37F
SUNBEAM Solar panel T55F
SUNBEAM Solar panel T78F
SUNBEAM Solar panel T21F
SUNBEAM Solar panel T111F
Width
37.8 cm
53.5 cm
54 cm
27.7 cm
54 cm
Nominal Power @ 12 V
37 W
55 W
78 W
21 W
111 W
Attachment
Adhesive, Loops
Adhesive, Screws, Loops
Adhesive, Screws, Loops
Adhesive, Loops
Adhesive, Screws, Loops
Length
53.5 cm
54.5 cm
77.8 cm
43.4 cm
1.06 m
Open circuit voltage (Uoc)
21.77 V
25.11 V
23.12 V
24.48 V
21.76 V
Short circuit current (Isc)
2.11 A
3.16 A
4.48 A
1.19 A
6.32 A
max. Power Voltage (Ump)
18.57 V
19.5 V
19.72 V
20.88 V
18.56 V
max. Power Current (Imp)
1.99 A
2.82 A
3.98 A
0.99 A
5.97 A
Availability / Price
7 left in stock
only €158 82
Buy now
9 left in stock
only €242 86
Buy now
9 left in stock
only €318 49
Buy now
9 left in stock
only €125 21
Buy now
9 left in stock
only €385 71
Buy now

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Deutsch

Technical question

Question:
User image of GUIRAUD P.
GUIRAUD P. asked
on Aug 9, 2020
Flag of English Hello, what do I need for out board boat with two engines and two battery? thanks
Answer:
User image of W P.
W P. answered
on Aug 12, 2020
In general, the following applies to all type of semi-flexible modules: if you cannot install the module in a fixed position and want to use it portable, you should make sure that it is stiffened at the back and cannot be bent back and forth. You will need 2x 1.5mm² connection cables (#16421#), a small charge controller (#65601#), a fuse holder (#47018#) with fuse (#15848#) and mounting material such as crimp connectors (#63730#), ring terminals (#63737#, #63738# or #63758#), heat shrink tubing (#55427#) or multiband (#16709#). if you want to make the module connector pluggable, you could use item #12550#. The module connection cable is 1 m. You may need to extend it to the charge controller with a 2x 1.5 mm² cable (#16421#). The cable from the charge controller to the battery should be as short as possible. If you only want to connect this module to the controller and not another one later, you can also use 2x 1.5 mm² here. In the positive wire to the battery you have to install a fuse close to the battery (max. distance = 20 cm). Alternatively if you have a cigarette lighter socket on board, which is constantly connected to the battery and not switched off by a battery disconnect switch, you could use charge controller #20205# and do not need a fuse and plug connection less additional installation material.