Item no.
24284
EAN
00663185777473
Model no.
T20F
Description
SUNBEAM Solar panel T21F
Construction type
Semi-flexible
Nominal Power @ 12 V
21
W
max. Power Current (Imp)
0.99
A
max. Power Voltage (Ump)
20.88
V
Short circuit current (Isc)
1.19
A
Open circuit voltage (Uoc)
24.48
V
Connector
None
Attachment
Adhesive, Loops
Module connection
Rear side
Connector cable
Flat cable, 2-core
Walkable
Yes
Length
43.4
cm
Width
27.7
cm
Height
3
mm
Product details
SUNBEAMsystem Tough Flush (TF) solar modules are a reliable source of energy even under the harshest conditions thanks to the highly efficient SUNPOWER cells (22.5% efficiency). Due to their impressive technical properties, the Tough-Flush modules are often used in the yacht and caravan sector, as well as in private and industrial off-grid systems.
The surface of these modules is extremely durable and resistant to high UV radiation. Its material has a better light transmission than conventional materials. When partially shaded, the physical cell arrangement ensures a higher output power than other modules. The surface structure improves power generation at low light incidence angles and has anti-slip properties. Assembly is extremely easy. The modules can be glued with SIKA 291 and / or screwed using existing stainless steel eyelets.
Special features of this module type
The semi-flexible flush modules, which are only 3 mm thin, feature no obstacles or tripping hazards on the module surface because there is no junction box. This is the only type of module that can be mounted almost flush with the surface (flush mount)!
Electrical connection from the back of the module is via an inconspicuous flat, white double-webbed cable (2x 1.6 mm²/approx. 1500 x 5.5 x 2.5 mm) and the cable can be attached almost invisibly next to the module on white surfaces/mounting surfaces.
Details at a glance
Special technical feature of flush modules
Because the connecting cables of the flush modules run directly out of the back of the module, there are no integrated blocking / bypass diodes on these modules. (For modules with a connection box, these are usually integrated in the connection box.)
Bypass / blocking diodes
Use bypass / blocking diodes if necessary (in accordance with the installation instructions). The F1200D Schottky diode (12A / 200V) is suitable for 5 - 350 Wp modules and is available from electronics retailers or from us on request.
To install, the module connection cables must be routed to a dry installation area and, together with the diode, mounted on suitable terminal blocks, e.g. item 47023. With powerful modules, "in-line" installation is not advisable, as the diodes can become quite warm when the module is shaded.
Make sure that the diodes have the correct polarity! A ring or point on the diode housing marks the cathode. This must be connected to the PLUS connection of the module.
Important: Incorrect or reverse polarity connected diodes can damage the solar module.
Technical data
Installation instructions
The surface of these modules is extremely durable and resistant to high UV radiation. Its material has a better light transmission than conventional materials. When partially shaded, the physical cell arrangement ensures a higher output power than other modules. The surface structure improves power generation at low light incidence angles and has anti-slip properties. Assembly is extremely easy. The modules can be glued with SIKA 291 and / or screwed using existing stainless steel eyelets.
Special features of this module type
The semi-flexible flush modules, which are only 3 mm thin, feature no obstacles or tripping hazards on the module surface because there is no junction box. This is the only type of module that can be mounted almost flush with the surface (flush mount)!
Electrical connection from the back of the module is via an inconspicuous flat, white double-webbed cable (2x 1.6 mm²/approx. 1500 x 5.5 x 2.5 mm) and the cable can be attached almost invisibly next to the module on white surfaces/mounting surfaces.
Details at a glance
- Semi-flexible
- High level of efficiency
- Durable and UV-resistant
- Small size & high performance
- Improved yield in partially shaded areas
- Yield enhancing, anti-slip surface structure
- Flush mounting (no annoying connection box on the module surface)
Special technical feature of flush modules
Because the connecting cables of the flush modules run directly out of the back of the module, there are no integrated blocking / bypass diodes on these modules. (For modules with a connection box, these are usually integrated in the connection box.)
Bypass / blocking diodes
Use bypass / blocking diodes if necessary (in accordance with the installation instructions). The F1200D Schottky diode (12A / 200V) is suitable for 5 - 350 Wp modules and is available from electronics retailers or from us on request.
To install, the module connection cables must be routed to a dry installation area and, together with the diode, mounted on suitable terminal blocks, e.g. item 47023. With powerful modules, "in-line" installation is not advisable, as the diodes can become quite warm when the module is shaded.
Make sure that the diodes have the correct polarity! A ring or point on the diode housing marks the cathode. This must be connected to the PLUS connection of the module.
Important: Incorrect or reverse polarity connected diodes can damage the solar module.
Technical data
| Type | T21F |
| Max. power (Pmax) | 21 W |
| Open circuit voltage (Uoc) | 24.48V |
| Short circuit current (Isc) | 1.19 A |
| Nominal voltage (Ump) | 20.88V |
| Nominal current (Imp) | 0.99 A |
| Weight: | 0.3 kg |
| Dimensions (L x W x H) | 434 x 277 x 3 mm |
| Cable length | 1.5 m |
Installation instructions
- Do not use modules> 50 W on a soft surface.
SUNBEAM Tough Flush (TF) solar modules with greater than 50 watts of power are designed for permanent installation on a solid surface. Mounting can be done by gluing or screwing. - For mobile or temporary use, modules up to 50 W and a fixed connection box are more suitable, such as the SUNBEAM T54QF.
Documents
Manual
PDF, 1,23 MB
by Reinhard W.
2/9/2021
Verified purchase
2/9/2021
Verified purchase
by Matjaz C.
10/19/2020
Verified purchase
10/19/2020
Verified purchase
Customers also bought
MINAX
Quick Fastener, Top Part / 10 pcs.
only €13
40
ALLEN BROTHERS
Type 3 Track Slides
from €1
85
Snap-in Shackles for Type 3 Sliders
from €1
26
KIWI GRIP
Non-Skid Deck Coating
from €58
78
Foam Brush 76.2 mm
only €1
64
€2.14
-23%
SIKA
Sikaflex - 290DC PRO Deck Joint Grouting / 300 ml
only €21
81
SEATEC
EPOTEC Epoxy Primer
from €22
65
€29.37
-23%
SUNBEAM
T37F Solar Panel / 37 W
only €155
42
Similar items
PHAESUN
FLY WEIGHT PREMIUM Solar Panel Kit / 3 x 45 W / 135 W
only €420
13
€458.00
-8%
PHAESUN
Fly Weight Premium Solar Module Kit / 90 W
only €336
09
PHAESUN
Solar Module Kit 12 V / 12 W
only €48
70
€54.50
-11%
SUNBEAM
NORDIC Solar Panel / 54 W
only €117
61
SUNBEAM
NORDIC Solar Panel / 104 W
only €201
64
PHAESUN
MARE FLEX 155 Solar Module / 1440 x 540 x 4 mm / incl. 5 m cable
only €390
71
PHAESUN
MARE FLEX 120 Solar Module incl. 5 m cable / 120 W
only €302
48
PHAESUN
MARE FLEX 55 Solar Module incl. 5 m cable / 55 W
only €142
82
PHAESUN
SPR-170 High-Performance Solar Panel / 170 W
only €348
70
€370.10
-6%
PHAESUN
SPR-120 High-Performance Solar Panel / 120 W
only €247
86
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!