SUNBEAM TOUGH 21 W Solar Panel / FLUSH
SUNBEAM TOUGH 55 W Solar Panel / FLUSH
SUNBEAMsystem Tough Flush (TF) solar modules are a reliable source of energy even under the harshest conditions thanks to the highly efficient SUNPOWER cells (22.5% efficiency). Because there is no junction box, the semi-flexible flush modules, which are only...
SUNBEAM TOUGH 111 W Solar Panel / FLUSH
SUNBEAMsystem Tough Flush (TF) solar modules are a reliable source of energy even under the harshest conditions thanks to the highly efficient SUNPOWER cells (22.5% efficiency). Because there is no junction box, the semi-flexible flush modules, which are only...
SUNBEAM TOUGH 78 W Solar Panel / FLUSH
SUNBEAMsystem Tough Flush (TF) solar modules are a reliable source of energy even under the harshest conditions thanks to the highly efficient SUNPOWER cells (22.5% efficiency). Because there is no junction box, the semi-flexible flush modules, which are only...
SUNBEAM TOUGH 37 W Solar Panel / FLUSH
SUNBEAMsystem Tough Flush (TF) solar modules are a reliable source of energy even under the harshest conditions thanks to the highly efficient SUNPOWER cells (22.5% efficiency). Because there is no junction box, the semi-flexible flush modules, which are only...
SVB recommends the following for this item
Product details
The surface of these modules is extremely durable and resistant to high UV radiation. Its material has a better light transmission than conventional materials. When partially shaded, the physical cell arrangement ensures a higher output power than other modules. The surface structure improves power generation at low light incidence angles and has anti-slip properties. Assembly is extremely easy. The modules can be glued with SIKA 291 and / or screwed using existing stainless steel eyelets.
Special features of this module type
The semi-flexible flush modules, which are only 3 mm thin, feature no obstacles or tripping hazards on the module surface because there is no junction box. This is the only type of module that can be mounted almost flush with the surface (flush mount)!
Electrical connection from the back of the module is via an inconspicuous flat, white double-webbed cable (2x 1.6 mm²/approx. 1500 x 5.5 x 2.5 mm) and the cable can be attached almost invisibly next to the module on white surfaces/mounting surfaces.
Details at a glance
- Semi-flexible
- High level of efficiency
- Durable and UV-resistant
- Small size & high performance
- Improved yield in partially shaded areas
- Yield enhancing, anti-slip surface structure
- Flush mounting (no annoying connection box on the module surface)
Special technical feature of flush modules
Because the connecting cables of the flush modules run directly out of the back of the module, there are no integrated blocking / bypass diodes on these modules. (For modules with a connection box, these are usually integrated in the connection box.)
Bypass / blocking diodes
Use bypass / blocking diodes if necessary (in accordance with the installation instructions). The F1200D Schottky diode (12A / 200V) is suitable for 5 - 350 Wp modules and is available from electronics retailers or from us on request.
To install, the module connection cables must be routed to a dry installation area and, together with the diode, mounted on suitable terminal blocks, e.g. item 47023. With powerful modules, "in-line" installation is not advisable, as the diodes can become quite warm when the module is shaded.
Make sure that the diodes have the correct polarity! A ring or point on the diode housing marks the cathode. This must be connected to the PLUS connection of the module.
Important: Incorrect or reverse polarity connected diodes can damage the solar module.
Technical data
Type | T21F |
Max. power (Pmax) | 21 W |
Open circuit voltage (Uoc) | 24.48V |
Short circuit current (Isc) | 1.19 A |
Nominal voltage (Ump) | 20.88V |
Nominal current (Imp) | 0.99 A |
Weight: | 0.3 kg |
Dimensions (L x W x H) | 434 x 277 x 3 mm |
Cable length | 1.5 m |
Installation instructions
- Do not use modules> 50 W on a soft surface.
SUNBEAM Tough Flush (TF) solar modules with greater than 50 watts of power are designed for permanent installation on a solid surface. Mounting can be done by gluing or screwing. - For mobile or temporary use, modules up to 50 W and a fixed connection box are more suitable, such as the SUNBEAM T54QF.
Documents
Customers also bought
Similar items
Comparison with other products
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .