GX1400G receives the position data required for DSC functions via an NMEA 0183 interface or via the integrated GPS receiver. User-defined softkeys can be assigned as required to make menu navigation even easier.
The system can also be switched to the inland navigation radio system ATIS. With the "preset key" function, the last 10 channels used can be recalled. If desired or necessary, the GPS position data of up to 4 yachts/boats that use DSC and are within radio range can be called up via so-called "polling".
- Power supply: 12 volt DC
- Water resistance: IPX8 (1.5 m for 30 min.)
- Power consumption: 25 W (Hi), 1 W (Lo)
- Dimensions (WxHxD): 156 x 61 x 100 mm
- Weight: 800 g
The DSC or ATIS function/menu is only available in the respective channel group. Please change to the corresponding channel group to use the respective functions.
Programming notes:This device has to be programmed with your personal data, such as: MMSI and/or ATIS numbers. You can program the MMSI and ATIS number yourself. Instructions on how to do this can be found in the manual.
Alternatively, we can carry out the programming for you. For this we charge out programming fee.
If desired, please enter your MMSI / ATIS number in the 'comment' field during your order or fill out our datasheet for programming VHF radios and send it to: email@example.com.
If additional channels (e.g. dutch channels 30, 31 and 37) are to be programmed, we also charge a programming fee.
The application for MMSI and ATIS numbers can be found at Service/Downloads.
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: firstname.lastname@example.org or by phone on: +49 (0)421 57290510 .