Stainless Steel Hose Clamps
Available variants:
Item no.
44029
EAN
4043171053358
Model no.
1000000302130
Clamping Range
10-16
mm
Product details
Hose clamps, made of stainless steel W 1.4301. Bandwidth: 12 mm. Adjusting screw with slot and hex head. The clamps can be connected to achieve a larger clamping range.
Customers also bought
PVC Fabric Hose
from €2
18
Steel Wire Reinforced PVC Hose
from €3
36
Drinking Water Hose
from €4
16
SIKA
Sikaflex - 291i Marine Sealant / Filler
from €7
14
Sanitation Hose with Barrier Layer
from €20
97
Wood Thru-Hull Plugs / Ø 10-40 mm
only €7
14
YACHTCARE
LEAK HERO Sealant / 625 ml
only €30
21
€39.80
-24%
Similar items
TRUDESIGN
Hose Clip
from €5
00
TRUDESIGN
Saddle Base for Hose Clips / 10 pieces
only €10
88
Plastic Hose Connectors / cross pipe
only €3
19
Plastic Hose Connectors / T-pipe
from €3
32
Plastic Hose Connectors / Y-pipe
from €2
77
Plastic Hose Connectors / angulated
from €3
32
TRUDESIGN
Adapter for Plug-in System
only €3
32
TRUDESIGN
Hose Connector, Angled / Black
from €6
68
€7.50
-11%
TRUDESIGN
Hose Connector / Straight
from €3
32
€3.90
-15%
Hose Adaptor Set
only €23
49
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
Technical question
Question:
Deividas T.
asked
on Apr 29, 2019
Stainless Steel Hose Clamps. What Clamping range means? Hose diameter? Which one do I need for 3/4" hose for example?
Answer:
The clamping range is the minimum and maximum permitted outer diameter of the hose when clamped. This will be somewhat less than the unclamped hose diameter once compression has been allowed for. So for example for a hose with 3/4” outer diameter (19mm) you would need either size 2 (that covers 12-22mm) or size 3 (16-25mm). Note that if 3/4” is the inner diameter you will need to know the wall thickness.
Answer:
The description on the SVB site says W 1.4301 this is 304 (A2) grade. I see this as fine for pipe fittings below deck and away from any bilges that might contain salt water. I would not however use them on deck where salt water spray might be present. Note that if you are looking for 316 clips be aware as some have 316 bands but the worm-screw and holder may not be 316.