SIMARINE SIMARINE PICO + System Monitor / surface mount, silver

Available on 01.04.2024
pcs.
SVB price: €218.45
You save: 9%
€238.94
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
pcs.
€218.45 This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
Buy
Available variants:
Image of SIMARINE PICO + System Monitor / surface mount, black

SIMARINE SIMARINE PICO + System Monitor / surface mount, black

The SIMARINE PICO+ is a high-quality system monitor to which all active SIMARINE shunts and/or measuring modules can be added as required and can then measure up to 6 battery banks (lead/acid, GEL, AGM or LiFePO4), 6 additional battery voltages, 14 tank levels...

Item no.
25501
EAN
3830067941049
Model no.
P202
Description
SIMARINE - PICO+ aluminium battery monitor / silver

SVB recommends the following for this item

Product details

The SIMARINE PICO+ is one of the most innovative on-board network monitors on the market in terms of technology and design and adds another high-quality system monitor to the SIMARINE PICO range (PICOone, PICO Standard and PICO Blue-Set). PICO+ is supplied without shunts/measuring modules and can be expanded as required with all active SIMARINE shunts and/or measuring modules. PICO+ contains a barometer with precise information about the air pressure, current weather developments or a graphical history up to 3 days.
With the respective shunts/measuring modules it can monitor up to 6 battery banks (lead/acid, GEL, AGM or LiFePO4, 24 or 24 V), 6 additional battery voltages, 14 tank levels and 20 consumer or generator currents and has extensive alarm functions.
The SIMARINE app (iOS/Android) displays all measured values on your smartphone and is useful for convenient programming of basic settings. PICO+ can, of course, also be operated via 4 touch keys on the display itself.
Innovative SIMARINE BUS technology makes installation child's play. Simply connect PICO+ to a small data splitter via a thin cable. The splitter is connected to a 12 or 24 V DC and provides the display with operating voltage. Shunts & measurement modules are connected to the splitter via 5 m long data lines (supplied with the shunt/measurement module), but can also be connected from shunt/measurement module to shunt/measurement module. An 8m data extension cable is optionally available.
The waterproof housing (IP67) can be mounted on any flat surface. It is fastened at the rear using four M3 threaded bolts and knurled nuts. Dimensions: 97.5 x 83 x 10 mm, colour: silver. Delivery includes: display, data splitter box, mounting material.

Example of use
The ST107 module alone can be used to provide a very precise display for several tanks. The module contains 4 resistance measuring inputs (0-65 kOhm), suitable for almost all common tank sensors (10-180 Ohm, 240-33 Ohm, 0-190 Ohm, etc.) as well as 3 voltage measuring inputs e.g. for the BEPMARINE TS1 ultrasonic tank sensor (this must be programmed to 0-5 V output signal). With up to 11 programmable calibration points, the levels of asymmetrically shaped tanks can be displayed very precisely, which is not possible with the usual tank displays.

PICO+ is delivered without shunts or measuring modules.
You can choose here the correct shunts, measuring modules and other accessories for your needs.

Shunts, measuring modules and accessories
Type Range of functions Manufacturer # SVB Item #
SC303 300 A shunt, detects 2x voltage, (battery) 3x resistance (of which 1x battery temperature sensor), DC cable, temp. sensor, 5 m SIMARINE data cable and mounting material included. S001 25502
SC503 500 A shunt, detects 2x voltage, (battery) 3x resistance (of which 1x battery temperature sensor), DC cable, temp. sensor, 5 m SIMARINE data cable and mounting material included. S002 24412
SC302T 300 A shunt, additionally measures 2x voltage (including 1x for battery), 2x resistor measurement (including 1x for battery temperature sensor) S005 24411
SC502T 500 A shunt, additionally measures 2x voltage (including 1x for battery), 2x resistor measurement (including 1x for battery temperature sensor) S006 25503
ST107 Tank & temperature measuring module, measures 3x voltage (eg for tank sensors with DC output signal such as BEPMARINE TS1, 4x resistor (for tank or temperature sensors), 1x neutral alarm changeover contact (loadable max 1 A, 30 V) T001 24413
SCQ25 Active 4-way 25 A shunt (individual shunts can be connected in parallel and the measured values can be added or subtracted via the software), 1x neutral alarm changeover contact (maximum load 1 A, 30 V) S003 24414
SCQ25T Active 4-way 25 A shunt (individual shunts can be connected in parallel and the measured values can be added or subtracted via the software), additionally measures 3x voltage (eg for tank sensors with DC output signal such as BEPMARINE TS1, 4x resistance (for tank or temperature sensors) , 1x neutral alarm changeover contact (maximum load 1 A, 30 V) S004 24415
TS01 NTC temperature sensor 10 k, 1%, waterproof, cable length 1 m TS01 24381
TS02 NTC temperature sensor 10 k, 1%, waterproof, cable length 5 m TS02 24382
DC02 Data cable extension 8 m, incl. RJ10 connector (socket / socket) DC02 24383
SKU Elastic cover for PICO body, blue C001 25504
SKU Elastic cover for PICO body, black C002 25505
Acoustic & optical signaling devices for shunts / measuring modules with alarm contact
Acoustic alarm, surface mounting, 12 V DC 23403
Acoustic alarm, surface mounting, 12/24 V DC 27864
Acoustic alarm, flush-mounted, 12 V DC 24113
Acoustic alarm, flush-mounted, 24 V DC 24127
Control lamp red, flush mounting, 12 V DC 46704
Control LED red, chrome-plated, flush-mounted, 12 V DC 24323
Control LED yellow, chrome-plated, flush-mounted, 12 V DC 24324
Control LED green, chrome-plated, flush-mounted, 12 V DC 24322
Control LED blue, chrome-plated, flush-mounted, 12 V DC 24325
Control LED red, chrome-plated, flush-mounted, 12/24 V DC 46049


Please note:
  • The PICO + can not be used as a second display (2nd control station) for an existing SIMARINE-PICO system monitor.
  • PICO+ includes a barometer. There is a small opening / diaphragm on the back of the housing. In order for the barometer to work properly, a corresponding hole must also be made in the mounting surface to match this opening.

Documents

en-flag Drawing
PDF, 276,83 KB
en-flag Short manual
PDF, 345,63 KB
en-flag Short manual
PDF, 70,54 KB
multi-flag Brochure
PDF, 1,58 MB
multi-flag Manual
PDF, 1,53 MB
multi-flag Manual
PDF, 1,78 MB
multi-flag Manual
PDF, 1,38 MB
multi-flag Manual
PDF, 1,51 MB
multi-flag Manual
PDF, 1,58 MB
multi-flag Manual
PDF, 2,80 MB

What other SVB customers have to say

100% real reviews
Nobody has rated this product yet

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Deutsch
No questions asked yet. Be the first to ask a question!