Generator 400+ / 24 V
This product is no longer available.
But a successive product is available:
But a successive product is available:
Product details
The generator, developed by sailors for sailors, is characterized by a particularly high performance, even at low wind speeds. It is suitable for all climates. The stable stable orientation even in heavy seas, the high quality, sealed, marine grade bearings and the silent blades makes it a wind generator that impresses and is well recognised on the market. It produces an extemely los noise, whatever the wind speed. The hybrid boost multi-stage charge regulator with bluetooth interface (Antroid and iOS compatible) is included. It offers the possibility to connect an additional solar capacity of max. 240 Watts (Wp). The energy consumption is only 20 mA. The regulator can charge AGM, gel, wet and lithium batteries. A large, backlit LCD display indicates all relevant information. A cable to connect an external stop switch is included, a LED indicates, among other things the the stop function. Automatically switching load output, max. 2 x 10 amps.
What is new?
Boost function
MPP control does make little sense from a technical point of view for small wind generators. But an adjustable boost function makes it possible to increase the charging capacity in areas with little wind. The power yield in areas with strong wind can also be optimized this way. The adjustable frequency boost affects the cogging torque in a way that for example an earlier charging start is ensured in areas with only light wind.
Bluetooth function
The controller has a backlit LCD display which shows all relevant data, as well as information on all the Bluetooth-enabled Android or iOS devices. The necessary setup settings can also be made via Bluetooth interface.
Stop function
The SILENTWIND generator 400+ stops automatically when the battery is full, or rather the rotational speed is reduced significantly due to the switch to charge retention. This way only a small part of the energy is used for the battery and a self-discharge is prevented. The generator can be stopped by the keyboard below the display AND by an included plug-in connection via an external stop switch. A LED confirms the active stop function.
Militarily certified components
As exclusively military certified electronic components are used for the production, the controller is resistant to extreme temperatures and continues to work reliably even in the event of electromagnetic interferences (EMC) or voltage peaks in the electrical board system.
Technical specifications
12 Volt | 24 Volt | |
Max. Solar power | 20A | 10 A |
Boost function | Start at 4 V Wind generator voltage | |
Temperature compensation | -35 ° to 80 ° C +/- 4mV / ° C / 2V | |
Fully switch battery to charge retention / PWM | Yes | |
Quiescent Current | <20 mA | |
Dimensions | 220 x 150 x 82 mm | |
Weight | 2.8 kg |
Caution: In the stainless steel tube is sold by the meter. The price always applies so per meter.
Documents
Accessories
-17%
SILENT WIND
Mast Mounting Kit for Wind Generator
€433.80
only
€361
30
1
JABSCO
Replacement Hub Cap Set Aero2Gen
only
€61
30
2
RUTLAND
Hub Cap for WG 913
only
€38
61
2
SILENT WIND
Replacement Carbon Fibre Blade for SILENTWIND Generator / 3-pc
only
€457
94
2
Stainless Steel Pipes / 48.3 mm / V2A
only
€53
74
27
See subsequent models of this product
Customers also bought
Stainless Steel Pipes / 48.3 mm / V2A
only
€53
74
27
SILENT WIND
Replacement Carbon Fibre Blade for SILENTWIND Generator / 3-pc
only
€457
94
2
Spraycap Handrail Holder
from
€68
87
2 variants
-10%
WEBASTO
Thru-Hull for Water Heater
€158.00
from
€142
82
2 variants
Mega LED 60 / BAY15D
only
€16
76
> 100
BA15d LED Light Bulb
only
€11
72
15
-40%
STEINER
COMMANDER - 7x50c Binoculars / with Compass
€1,252.09
only
€756
26
> 25
WEBASTO
Heat Insulation Hose for Water Heater
from
€123
95
2 variants
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:
Benjamin P.
asked
on Apr 8, 2018
What connecting cable do I need between generator and controller?
Answer:
The required cable cross-section depends on the distance between generator and charge controller. You will need 3 wires to connect the 3-phase AC voltage to the controller. On this website you will find some documents below the product description. Please open the 3.25 MB PDF manual (Hybrid Boost Charge Controller). Refere to 5. "Cable size selection". There you will find a tabel with different cable lengths and the required cable cross-sections. Cable cross sections are indicated in mm² and in AWG (American Wire Gauge). Do not mix these values!