Item no.
57794
Model no.
SX80/185T-12V
Description
SIDE-POWER - SX80 stern thruster / max. hull thickness 100 mm
Operating voltage
12 V
for Boats
10 - 15 m
Recommended fuse
400
A
Necessary accessories for this item
Product details
The SX series external stern thrusters are perfect for boats with twin stern drives. They feature special cowls that divert the water flow past the stern drive legs to provide excellent thrust performance. These stern thrusters come pre-assembled in a watertight housing and feature fully sealed cable connection points. Only a small hole in the boat's transom is required for power and control cables. Fully ignition protected for use in boats with petrol engines - no fumes can enter through the sealed connection points. As they are externally mounted, the SX series units are the perfect choice if the inside configuration of the boat’s stern makes a standard thruster installation impractical.
Technical specifications:
SX stern thrusters can also be fitted with a proportional speed control.
Sealed gearleg with long-life mechanical seal, where highly polished ceramic and carbon surfaces form the only moving sealing surfaces. Pre-filled with special gear oil for lifetime lubrication and maximum protection against water ingress.
Twin Propellers
The twin propeller system gives more thrust than a single propeller system in the same tunnel diameter. Side-Power use this principle in systems for medium-sized boats where high thrust is needed in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thruster of choice among boat builders around the world.
Galvanic Separation
The gearbox housings of most 12 and 24 volt Side-Power bow thrusters are fully galvanically isolated / separated from the electric motor and motor bracket.
Technical specifications:
- On-board voltage: 12 volts
- Maximum thrust at 10.5V: 80 kg, at 12V : 96 kg
- Power at 10.5 V : 4.4 kW
- Tunnel diameter: 185 mm
- Hull thickness: max. 100 mm (recommended 80 mm)
- Weight: 52 kg
SX stern thrusters can also be fitted with a proportional speed control.
IPC Intelligent Power Control
Side-Power systems feature an integrated processor that constantly monitors relay function to protect against malfunction and ensure the safety of the vessel and crew in the event of user error.
Side-Power systems feature an integrated processor that constantly monitors relay function to protect against malfunction and ensure the safety of the vessel and crew in the event of user error.
Sealed Gearleg
Sealed gearleg with long-life mechanical seal, where highly polished ceramic and carbon surfaces form the only moving sealing surfaces. Pre-filled with special gear oil for lifetime lubrication and maximum protection against water ingress.
Twin Propellers
The twin propeller system gives more thrust than a single propeller system in the same tunnel diameter. Side-Power use this principle in systems for medium-sized boats where high thrust is needed in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thruster of choice among boat builders around the world.
Galvanic Separation
The gearbox housings of most 12 and 24 volt Side-Power bow thrusters are fully galvanically isolated / separated from the electric motor and motor bracket.
IP - Sealed Design
These electric thrusters are fully ignition protected and can be safely installed in the engine compartment on boats with petrol engines (ISO 8846).
They have a hermetically sealed composite housing around all electric parts, ensuring that no petrol fumes or water can enter and reach the electric motor or other system components. This makes these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.
These electric thrusters are fully ignition protected and can be safely installed in the engine compartment on boats with petrol engines (ISO 8846).
They have a hermetically sealed composite housing around all electric parts, ensuring that no petrol fumes or water can enter and reach the electric motor or other system components. This makes these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.
Documents
PDF, 2,10 MB
PDF, 4,26 MB
Accessories

SIDE-POWER
Panel with Touch Buttons
only €126
01
€133.00
-5%

SIDE-POWER
Control Cable for Bow Thruster / Stern Thruster
from €21
81

SIDE-POWER
Joystick for Bow Thruster / Stern Thruster
only €175
59
€185.00
-5%

SIDE-POWER
Replacement Propeller for Bow Thruster / 5-blade
from €37
77

SIDE-POWER
Single Remote Control for Bow Thruster / Anchor
only €336
09
€360.00
-7%

SIDE-POWER
Dual Remote Control for Bow Thruster and Stern Thruster
only €340
29
€360.00
-5%

SIDE-POWER
Dual Remote Control for Bow Thruster and Anchor Winches
only €504
16
€542.00
-7%

SIDE-POWER
Cowl Kit for 185mm Tunnel / short
only €176
43
€187.00
-6%

SIDE-POWER
Cowl Kit for 185mm Tunnel / long
only €147
02
€155.00
-5%

Aluminium Anode for Side Power SE60 / 80/100 & SP55 / 75/95
only €10
88
Similar items

SIDE-POWER
SE130T Stern and Bow Thruster
only €3.109
20

SIDE-POWER
SE25 Stern and Bow Thruster
only €899
12
€957.00
-6%

SIDE-POWER
SX80 Stern Thruster / 24 V / 96 kgf / max. hull thickness 100 mm
only €4.184
83

SIDE-POWER
SE100T Bow-Stern Thruster
only €2.420
13
€2,549.00
-5%

SIDE-POWER
SE80T Bow-Stern Thruster
only €1.915
92

SIDE-POWER
SE60 Bow-Stern Thruster
only €1.361
30
€1,459.00
-7%

SIDE-POWER
SE50 Bow-Stern Thruster
only €1.260
46
€1,339.00
-6%

SIDE-POWER
SE40 Bow-Stern Thruster
only €1.075
59

SIDE-POWER
SE30 Bow-Stern Thruster
only €957
94
€1,014.00
-6%

SIDE-POWER
SX50S1 Hydropod External Bow Thruster / 2.8 kW / 62 kgf / max. hull thickness 150mm
only €3.361
30
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!