SX35 Hydropod External Bow Thruster / incl. i-Box / 1.8 KW / 12 V
This product is no longer available.
Product details
This compact and practical SX series bow and stern thruster from SIDE-POWER is externally mountable and ideally suitable for boats where a tunnel bow thruster cannot be installed, regardless of the hull shape, material and propulsion system.
The SX models can be used in all types of boats, from sailboats and motorboats to catamarans with steel, aluminium, wood or GRP hulls.
As the external bow thruster is installed further forward towards the bow compared to a conventional tunnel bow thruster and has a significantly lower installation position, a much better leverage effect is achieved. This means that the EX series bow thrusters can move considerably larger boats with a lower nominal power.
Characteristics
Hydrodynamic design
Very short cross channel and ideal positioning reduce water resistance compared to conventional systems. Loss of speed is not noticeable.
Easy installation
Only three small installation holes are required, which are sealed with special rubber gaskets. No laminating necessary.
Noise reducing
External design results in significant noise reduction. Deeper installation position for minimal cavitation.
Longer operating times
The external mounting position under the hull allows efficient cooling. This results in considerably longer operating times than with conventional systems.
Space-saving installation
The external construction of the unit saves a lot of space on board compared to conventional systems.
Optimum efficiency
The significantly shorter cross tunnel and ideal leverage effect due to the deeper installation position, further away from the pivot point, result in optimum efficiency. This enables an increase in efficiency of up to 40% compared to conventional systems.
Quality
All components of the SX series are carefully constructed coordinated so that the systems meet the highest quality requirements. Manufactured in our ISO-certified factory in Fredrikstad.
i-BOX - Intelligent system control
Technical specifications
The SX models can be used in all types of boats, from sailboats and motorboats to catamarans with steel, aluminium, wood or GRP hulls.
As the external bow thruster is installed further forward towards the bow compared to a conventional tunnel bow thruster and has a significantly lower installation position, a much better leverage effect is achieved. This means that the EX series bow thrusters can move considerably larger boats with a lower nominal power.
Characteristics
Hydrodynamic design
Very short cross channel and ideal positioning reduce water resistance compared to conventional systems. Loss of speed is not noticeable.
Easy installation
Only three small installation holes are required, which are sealed with special rubber gaskets. No laminating necessary.
Noise reducing
External design results in significant noise reduction. Deeper installation position for minimal cavitation.
Longer operating times
The external mounting position under the hull allows efficient cooling. This results in considerably longer operating times than with conventional systems.
Space-saving installation
The external construction of the unit saves a lot of space on board compared to conventional systems.
Optimum efficiency
The significantly shorter cross tunnel and ideal leverage effect due to the deeper installation position, further away from the pivot point, result in optimum efficiency. This enables an increase in efficiency of up to 40% compared to conventional systems.
Quality
All components of the SX series are carefully constructed coordinated so that the systems meet the highest quality requirements. Manufactured in our ISO-certified factory in Fredrikstad.
i-BOX - Intelligent system control
- Minimum electronic switching delay in case of abrupt change of thrust direction
- Permanent monitoring of the relay function
- Automatic deactivation of the bow thruster in case of a malfunction of the relay, additional actuation of the main switch is not necessary
- Compatibility with all Side-Power bow and stern thrusters is guaranteed by using standard Side-Power components.
Technical specifications
Power at | 1.8 kW |
Thrust at | 43 kg |
Weight | 14.3 kg |
Voltage | 12V |
Rec. CCA | 300 A |
For ship length | 6-10 m |
Dimensions (LxWxH) |
Similar items
-5%
SLEIPNER / SIDE-POWER
Stern Thruster Set SE100T / 12 V / 6.3 kW / 116 kgf
€2,949.00
only
€2.798
28
1
VETUS
Stern Thruster - Set
only
€3.239
45
VETUS
Stern Thruster - Set
only
€2.411
72
VETUS
Stern Thruster - Set
only
€2.411
72
3
VETUS
Stern Thruster - Set
only
€2.100
80
2
VETUS
Stern Thruster - Set
only
€1.899
12
VETUS
Stern Thruster - Set
only
€1.904
16
VETUS
Stern Thruster - Set
only
€1.344
50
VETUS
Stern Thruster - Set
only
€1.176
43
1
-7%
SLEIPNER / SIDE-POWER
Stern Thruster Set SE60S / 12 V / 3.1 kW / 73 kgf
€1,815.00
only
€1.680
63
1
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!