SLEIPNER / SIDE-POWER EX95S External Bow Thruster / Stern Thruster incl. I-Box / 3.0 kW / 24 V
Article Number
57703
EAN
7070969016612
Model no.
EX95S
Description
SIDE POWER - EX95S external bow thruster incl. I-Box
Thruster type
Bow thruster, Stern thruster
Operating voltage
24 V
Recommended fuse
100
A
Power
3
kW
Max. thrust
67
kg
For boats
12 - 15
m
Tunnel diameter
150
mm
Min. waterline distance
100
mm
Speed-controlled
No
Dual propeller
No
Installation type
External
Variant
Single
Weight
19.5
kg
Necessary accessories for this item
Product details
This compact and practical EX series bow and stern thruster from SIDE-POWER is externally mountable and ideally suitable for boats where a tunnel bow thruster cannot be installed, regardless of the hull shape, material and propulsion system.
The EX models can be used in all types of boats, from sailboats and motorboats to catamarans with steel, aluminium, wood or GRP hulls.
As the external bow thruster is installed further forward towards the bow compared to a conventional tunnel bow thruster and has a significantly lower installation position, a much better leverage effect is achieved. This means that the EX series bow thrusters can move considerably larger boats with a lower nominal power.
Features
Hydrodynamic design
Very short cross channel and ideal positioning reduce water resistance compared to conventional systems. Loss of speed is not noticeable.
Easy installation
Only three small installation holes are required, which are sealed with special rubber gaskets. No laminating necessary.
Noise reducing
External design results in significant noise reduction. Deeper installation position for minimal cavitation.
Longer operating times
The external mounting position under the hull allows efficient cooling. This results in considerably longer operating times than with conventional systems.
Space-saving installation
The external construction of the unit saves a lot of space on board compared to conventional systems.
Optimum efficiency
The significantly shorter cross tunnel and ideal leverage effect due to the deeper installation position, further away from the pivot point, result in optimum efficiency. This enables an increase in efficiency of up to 40% compared to conventional systems.
Quality
All components of the EX series are carefully constructed coordinated so that the systems meet the highest quality requirements. Manufactured in our ISO-certified factory in Fredrikstad.
i-BOX - Intelligent system control
Delivery includes the i-Box control unit and the EX95S bow and stern thruster.
The mounting kit is not included in delivery.
Technical specifications
The EX models can be used in all types of boats, from sailboats and motorboats to catamarans with steel, aluminium, wood or GRP hulls.
As the external bow thruster is installed further forward towards the bow compared to a conventional tunnel bow thruster and has a significantly lower installation position, a much better leverage effect is achieved. This means that the EX series bow thrusters can move considerably larger boats with a lower nominal power.
Features
Hydrodynamic design
Very short cross channel and ideal positioning reduce water resistance compared to conventional systems. Loss of speed is not noticeable.
Easy installation
Only three small installation holes are required, which are sealed with special rubber gaskets. No laminating necessary.
Noise reducing
External design results in significant noise reduction. Deeper installation position for minimal cavitation.
Longer operating times
The external mounting position under the hull allows efficient cooling. This results in considerably longer operating times than with conventional systems.
Space-saving installation
The external construction of the unit saves a lot of space on board compared to conventional systems.
Optimum efficiency
The significantly shorter cross tunnel and ideal leverage effect due to the deeper installation position, further away from the pivot point, result in optimum efficiency. This enables an increase in efficiency of up to 40% compared to conventional systems.
Quality
All components of the EX series are carefully constructed coordinated so that the systems meet the highest quality requirements. Manufactured in our ISO-certified factory in Fredrikstad.
i-BOX - Intelligent system control
- Minimum electronic switching delay in case of abrupt change of thrust direction
- Permanent monitoring of the relay function
- Automatic deactivation of the bow thruster in case of a malfunction of the relay, additional actuation of the main switch is not necessary
- Compatibility with all Side-Power bow and stern thrusters is guaranteed by using standard Side-Power components.
Delivery includes the i-Box control unit and the EX95S bow and stern thruster.
The mounting kit is not included in delivery.
Technical specifications
Power at | 3.0 kW |
Thrust at | 67 kg |
Thrust equivalent | 94 kg x 1.4 |
Voltage | 24 V |
Rec.. CCA | 175 A |
For ship length | 12-15 m |
Dimensions (h x w x d) | 544 x 165 x 165 mm |
Accessories
-5%
SLEIPNER / SIDE-POWER
Panel with Touch Buttons
€133.00
only
€126
01
8
SLEIPNER / SIDE-POWER
Control Cable for Bow Thruster / Stern Thruster
from
€21
81
5 variants
-5%
SLEIPNER / SIDE-POWER
Joystick for Bow Thruster / Stern Thruster
€185.00
only
€175
59
22
SLEIPNER / SIDE-POWER
Cable Switch for Control Panels
only
€13
40
9
-7%
SLEIPNER / SIDE-POWER
GRP Adapter for V-Hull
€590.00
only
€546
18
3
-7%
SLEIPNER / SIDE-POWER
Fixing Kit for EX Bow Thruster
€308.00
only
€285
67
-8%
SLEIPNER / SIDE-POWER
Mooring Protector
€219.00
only
€201
64
1
-7%
SLEIPNER / SIDE-POWER
Single Remote Control for Bow Thruster / Anchor
€360.00
only
€336
09
-5%
SLEIPNER / SIDE-POWER
Dual Remote Control for Bow Thruster and Stern Thruster
€360.00
only
€340
29
2
SLEIPNER / SIDE-POWER
Zinc Anode for EX Bow Thruster
only
€37
77
6
SLEIPNER / SIDE-POWER
Propeller for 24V EX Bow Thruster
only
€83
99
2
Customers also bought
LIQUI MOLY
Marine Diesel Protection / Additive
from
€20
13
2 variants
MAMA EARTH Paper Chart with Coordinates
only
€4
62
> 100
-5%
SLEIPNER / SIDE-POWER
Panel with Touch Buttons
€133.00
only
€126
01
8
SLEIPNER / SIDE-POWER
Control Cable for Bow Thruster / Stern Thruster
from
€21
81
5 variants
BLUE SEA
ANL Fuse Holder AK2
only
€29
37
32
-5%
SLEIPNER / SIDE-POWER
Joystick for Bow Thruster / Stern Thruster
€185.00
only
€175
59
22
SLEIPNER / SIDE-POWER
Cable Switch for Control Panels
only
€13
40
9
-8%
SLEIPNER / SIDE-POWER
Mooring Protector
€219.00
only
€201
64
1
-7%
SLEIPNER / SIDE-POWER
Fixing Kit for EX Bow Thruster
€308.00
only
€285
67
Similar items
-5%
SLEIPNER / SIDE-POWER
Stern Thruster Set SE100T / 12 V / 6.3 kW / 116 kgf
€2,949.00
only
€2.798
28
1
VETUS
Stern Thruster - Set
only
€3.239
45
VETUS
Stern Thruster - Set
only
€2.411
72
VETUS
Stern Thruster - Set
only
€2.411
72
3
VETUS
Stern Thruster - Set
only
€2.100
80
2
VETUS
Stern Thruster - Set
only
€1.899
12
VETUS
Stern Thruster - Set
only
€1.904
16
VETUS
Stern Thruster - Set
only
€1.344
50
VETUS
Stern Thruster - Set
only
€1.176
43
1
-7%
SLEIPNER / SIDE-POWER
Stern Thruster Set SE60S / 12 V / 3.1 kW / 73 kgf
€1,815.00
only
€1.680
63
1
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!