Item no.
74429
Model no.
ACC106
Description
Watertight deck connection N10 / ACC106 (RG213)
Installation type
Surface mounted
Product details
A very high-quality low-loss and waterproof connector for RG213 coax cable (cable Ø 10 mm). Complete with N-connector, grommets, sealing and fastening materials.
Below deck, the cable is screwed directly to the separation point.
- Type N10 / ACC106 for cable Ø 10 mm (RG213)
Note: The manual includes different products. Please refer to the section for 'N-Type' ACC106.
Documents
.PDF, 784,93 KB
Customers also bought

Plug Connector, 2 pole / chrome-plated brass
only €14
24
€15.04
-5%

Deck Seal, Chrome-plated brass
from €6
68

YACHTICON
AQUA CLEAN without Chlorine
from €7
52

Mega LED 60
only €17
61

WINDEX
WINDEX 15 Wind Direction Indicator /380 mm
only €35
25
€45.71
-23%

Plug Connector, 3 pole / chrome-plated brass
only €16
76

Plug Connector, 4 pole / chrome-plated brass
only €18
45

PL Connector for RG58U Cable
only €2
48

PL Connector for Lower Deck
only €2
27
Similar items

SHAKESPEARE
Watertight Plug Connector for RG58 Coaxial Cable
only €38
61
€46.16
-16%

BINDER
Flange Socket for Angled and Mounted Housings
only €10
88

Plug-in Connector / 4-pin / 5 A
only €33
57
€37.39
-10%

Plug-in Connector / 3-pin / 5 A
only €20
97

AQUA SIGNAL
Replacement Socket / vertical
only €38
61
€44.80
-14%

AQUA SIGNAL
Plug Connector & Plug / vertical
only €41
97
€50.40
-17%

BINDER
Surface Mounting Base / 3 Sockets / vertical
only €15
08
€15.97
-6%

BINDER
Surface Mounting Base / single / vertical
only €6
30
€6.89
-9%

X-Lok Quick Connector / Waterproof / 5-pin
only €24
33

X-Lok Quick Connector / Waterproof / 3-pin
only €18
45
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:

Jan O.
asked
on Jun 21, 2020
Answers:
Hi Jan, the deck feed-through consists of an N-type socket (mounted on the round mounting plate) to which the RG58 or RG213 cable (below deck) is directly connected. No additional plug is required here. An RG58 or RG213 plug is supplied to connect the antenna cable on deck to the feed-through. To connect the RG58 or RG213 cable below deck to the VHF-radio, you will normally need a PL259 connector, item no. #73710# for RG58 or #73711# for RG213.
Sorry, for the connection to the VHF-radio below deck I forgot to mention the PL259 connector for RG58 or RG8X cable, item no. #80231#, which is easy to mount without special tools. Note: #80231# is not suitable for RG213.