SEATEC STANDARD PRO Self-Polishing Antifouling

Reset image position
Close
Back
Item no. 66667, 66668, 66669, 66670, 66671, 66672, 66673, 66674
SVB price: €20.97 (€27.96 / l )
You save: 26%
€28.53
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
more than 100 in stock
pcs.
Item no.
66667
EAN
5035686881792
Model no.
66667
Description
SEATEC - Antifouling STANDARD PRO
Antifouling type
Self-polishing antifouling
Colour code
Red brown
Area of application
Salt water, Fresh water, Brackish water / Mixed operation
Hull material
GRP, Wood, Steel
Method of application
Roller, Brush, Spray gun
Biocide-free
No
Immersion after
6 h @ 15 °C
Max. time before immersion
6 months
Yield (theoretical)
7.5 m²
BAuA-No.
N-74279
Boat type
Sailboat, Motorboat
No. of coats (recommended)
2 - 3
Existing coating
SEATEC Standard Pro, INTERNATIONAL Cruiser 200, INTERNATIONAL Cruiser 250, INTERNATIONAL Micron 300, INTERNATIONAL Micron 350, HEMPEL Classic, HEMPEL Mille NCT, HEMPEL Ecopower Cruise, AWN Selbstpolierendes Antifouling, EPIFANES Copper-Cruise
For the Netherlands
No

SVB recommends the following for these items

Product details

A further development of STANDARD, the proven SEATEC Antifouling. STANDARD PRO is a universal, self-polishing antifouling for sailing yachts, dinghies and motor yachts, based on bioactive, organic and copper compounds. Due to the self-polishing effect, there is always an active layer on the surface and thick layers don't accumulate over the years. An additional coat of the same quality can be applied directly onto the existing antifouling. Thinner: Antifouling Thinner. Yield: 10 m²/l. Recommendation: For use in the Mediterranean, we recommend our Seatec SPRINT PRO.

Processing instructions

Older self-polishing antifoulings can be painted over without issue after thorough cleaning. A special primer is not necessary in this case.

For coated surfaces
  • In good condition: Remove fouling, impurities and paint residues completely and then sand wet with 80-120 grit sandpaper (not dry!). If existing antifouling is not compatible or unknown, seal with suitable barrier coat.
  • In poor condition: Remove all antifouling residues.

GRP/Blank gelcoat: Make sure the surface is clean, dry, dust-free and in a generally good condition. Then prime the surface with Plasmotec or with Epotec (osmosis protection). Then apply two coats of STANDARD PRO.

Steel/lead and wood: Make sure the surface is clean, dry, dust-free and in a generally good condition. Then prime the surface with Plasmotec or with Epotec to protect the hull from corrosion. Then apply two coats of STANDARD PRO.

Not suitable for application on aluminium or older PTFE antifoulings!

Drying time
Temperature 5° C / 41° F 15° C / 59° F 23° C / 73° F 35° C / 95° F
Hand dry after 60 minutes 45 minutes 30 minutes 20 minutes
Launch after 8 hours 6 hours 4 hours 4 hours
Overcoat interval
Temperature Time
5° C / 41° F 16 hours
15° C / 59° F 10 hours
23° C / 73° F 6 hours
35° C / 95° F 4 hours
These antifoulings / paints may not be used in Holland.

Use biocidal products with care. Always read the label and product information prior to use.

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Warning
Hazard warnings
May cause an allergic skin reaction.
May cause respiratory irritation.
Very toxic to aquatic life with long lasting effects.
Flammable liquid and vapour.
Causes serious eye damage.
Immediately call a POISON CENTER or doctor/physician.
IF IN EYES:
Dispose of contents/container to …
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Take off contaminated clothing and wash before reuse.
IF ON SKIN:
In case of inadequate ventilation wear respiratory protection.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Keep cool.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Read label before use.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
H317, H335, H410, H226, H318, P310, P305, P501, P304+P340, P303+P361+P353, P362, P302, P285, P280, P273, P271, P235, P210, P103, P102, P101

Documents

en-flag Datasheet
PDF, 128,72 KB
en-flag Safety datasheet
PDF, 184,21 KB
de-flag Safety datasheet
PDF, 187,14 KB
fr-flag Safety datasheet
PDF, 186,88 KB
it-flag Safety datasheet
PDF, 182,72 KB

What other SVB customers have to say

100% real reviews

400 customer reviews

4.6 (out of 400 ratings)
  • Advantages
  • Colour (18)
  • Yield (theoretical) (17)
  • Price/performance ratio (18)
  • Processing (17)
  • Effect (12)
  • Disadvantages
  • Colour (1)
  • Yield (theoretical) (1)
  • Price/performance ratio (2)
  • Processing (2)
  • Effect (4)
Ivan I.
by Ivan I. Flag of Slovenia 5/25/2022 Variant: 66667
After two years in the northern adriatic the results are as expected, perhaps even better than the more expensive competition
Algirdas D.
by Algirdas D. Flag of Lithuania 4/27/2022 Verified purchase Variant: 66668
I have been painting it for the second year. The result is great.
Harri K.
by Harri K. Flag of Finland 3/8/2021 Verified purchase Variant: 66670
Kustas
Fast deelivery. Good quality for good price.

Customer images (3) from all reviews

View all ratings

Rate product

How would you rate this product?
Disappointed
Completely fails to meet my expectations
Poor
Only some expectations are met
OK
Meets my basic expectations
Good
Slightly better than my general expectations
Excellent
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Nederlands
  • Flag of Deutsch
  • Flag of Français
  • Flag of Español
  • Flag of Italiano

Technical question

Question:
User image of Olli V.
Olli V. asked
on Oct 13, 2018
Flag of English Hello! I am very satisfied with this antifouling. Is it possible that you ask the factory make colour dark grey. I think that may be very polular because very often new boats has that colour waterline or hole hull. Best regards Olli
Answer:
User image of Mika S.
Mika S. answered
on Oct 16, 2018
Hi Olli, I used black color and I´ll think, it´s as good as dark grey. At least in my boat with white hull, black antifoulding looks great.
Question:
User image of Heikki L.
Heikki L. asked
on Nov 1, 2018
Flag of English Hi! - Do you ship this product to Finland? - What is the minimum temperature for using this paint? - Do you user guide(in english) for this product?
Answers:
User image of Kari R.
Kari R. answered
on Nov 1, 2018
Kyllä ovat toimittaneet kotiovelle tänäkin keväänä ja edullisesti (8,90 eur) .Varmaankin samat lämpötilat kuin suomessa myytävillä antifoulingeilla,olen käyttänyt Seatecia jo 3 vuotta ainakin ja hyvin on toiminut.Käyttöohjeet löytyvät enlanniksi muistaakseni samoilta sivuilta kuin maalikin.
User image of Risto K.
Risto K. answered
on Nov 1, 2018
Ihan hyvä tuote, ehkä parempi kuin monet kalliimmat. Olen ohentanut ja tulos on ollut hyvä. Ymmärtääkseni normaali maalauslämpötila eli ei pakkanen.
User image of Markku E.
Markku E. answered
on Nov 1, 2018
Super maali.Olen käyttänyt useamman sesongin.+10C minimi. Syksyllä kevyt painepesu ja puhdas näkitön pinta.
Question:
User image of Kari S.
Kari S. asked
on May 8, 2020
Flag of English Hi Seatec self polishing antifouling on old Micron Extra, any experiences? Kari Suosalmi karisuo@posti24.fi
Answers:
User image of Mats B.
Mats B. answered
on May 8, 2020
It is a grate produkt I have used it on the swedish westcost and it have kept the bottom clean
User image of Olli V.
Olli V. answered
on May 8, 2020
I have used, works well. The oldone must be clean ofcourse.
User image of Kari S.
Kari S. answered
on May 8, 2020
Thanks The old Micron is still working, but needs some more cover after all these years. I will try Seatec.
User image of PETER L.
PETER L. answered
on May 11, 2020
I had Hempel before and it was replaced by Seatec years ago , and old paint was mixed with app. 30 % thinner so i had to remove all the dust before repainting it works fine .