PRO TENDER 220 Rigid Inflatable Boat / 3 Person / 2.24 m

Colour	Sand/white
Bow Form	Modern (MX)
Skirting boards	Type F in dark-grey/white
Lifeline	Yes
Seating board	1
Towing eyes/Transport eyes	1 / 3
Length	2.24 m
Width	1.53 m
Length (inner)	1.43 m
Width (inner)	0.71 m
Hose-Diameter	39 cm
Air chambers	3 sections
Pack size (L x W x H)	196 x 111 x 48 cm
Weight	39.3 kg
Air Pressure	0.25 bar
Max. Engine Power	3.7 kW / 5 hp
Max. Engine Weight	40 kg
Recommended Shaft Length	Short shaft
Transom Height (cm)	38 cm
Payload	350 kg
Carrying capacity	3

Note regarding the material:
The SEATEC rigid inflatable boats are made of a special 5 layer PVC (polyvinyl chloride) material. The base consists of a poly fiber (polyester) fabric lining. The fabric is made of 1100 Decitex and is thus very sturdy. The fabric is lined on the interior and exterior with a so-called adhesive layer. This layer serves as a substrate for the equally double-sided PVC coating. Thanks to the PVC coating, the dinghy is airtight and sturdy. Only first-rate PVC material is used, which has specially been developed for the production of dinghies and has proven its durability for years. The material strength is approx. 0.7 mm and the boat's skin weighs about 850 g/m². The material is made in Germany. Max. tensile force is approx. 2500 N/ 5 cm.