Item no.
24219
EAN
4260416460232
Model no.
24219
Description
SEATEC - Polyester resin
SVB recommends the following for these items
Product details
Styrene-reduced polyester resin for repairs and reinforcements. The laminate is produced in conjunction with glass fiber mat or glass fabric. Suitable for use on metal, wood and fiberglass. Good resistance to water, salt water, acids and alkalis. The material hardens by adding 1-3% hardener. The substrate must be dry, clean and free of wax and grease. The processing temperature should be at least +15° C. A final coat (SEATEC gelcoat) is required. Delivery includes hardener.
Application:
Pre-coat the prepared repair site with resin, then apply the polyester resin on glass fiber mat or glass fabric. Firmly apply the laminate, deaerate and allow to harden. Add more layers if necessary. After curing, grind, apply putty, varnish or seal the surface. The average resin requirement for a glass fiber reinforcement is 3x glass mat weight or 1x glass fabric weight. Pot life: approx. 30 minutes (20° C)
Application:
Pre-coat the prepared repair site with resin, then apply the polyester resin on glass fiber mat or glass fabric. Firmly apply the laminate, deaerate and allow to harden. Add more layers if necessary. After curing, grind, apply putty, varnish or seal the surface. The average resin requirement for a glass fiber reinforcement is 3x glass mat weight or 1x glass fabric weight. Pot life: approx. 30 minutes (20° C)
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Causes skin irritation.
Harmful if inhaled.
Harmful if swallowed.
Suspected of damaging fertility or the unborn child.
May cause respiratory irritation.
Toxic to aquatic life with long lasting effects.
Flammable liquid and vapour.
Very toxic to aquatic life with long lasting effects.
Causes serious eye irritation.
Causes severe skin burns and eye damage.
Heating may cause a fire.
Wear protective gloves/protective clothing/eye protection/face protection.
IF exposed or concerned: Get medical advice/attention.
Keep only in original container.
Immediately call a POISON CENTER or doctor/physician.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Store in a well-ventilated place. Keep cool.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
Do not breathe dust/fume/gas/mist/vapours/spray.
Dispose of contents/container to …
In case of fire: Use … for extinction.
Collect spillage.
Avoid release to the environment.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Harmful if inhaled.
Harmful if swallowed.
Suspected of damaging fertility or the unborn child.
May cause respiratory irritation.
Toxic to aquatic life with long lasting effects.
Flammable liquid and vapour.
Very toxic to aquatic life with long lasting effects.
Causes serious eye irritation.
Causes severe skin burns and eye damage.
Heating may cause a fire.
Wear protective gloves/protective clothing/eye protection/face protection.
IF exposed or concerned: Get medical advice/attention.
Keep only in original container.
Immediately call a POISON CENTER or doctor/physician.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Store in a well-ventilated place. Keep cool.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
Do not breathe dust/fume/gas/mist/vapours/spray.
Dispose of contents/container to …
In case of fire: Use … for extinction.
Collect spillage.
Avoid release to the environment.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
H315, H332, H302, H361, H335, H411, H226, H410, H319, H314, H242, P280, P308+P313, P234, P310, P303+P361+P353, P403+P235, P301+P330+P331, P260, P501, P370+P378, P391, P273, P210, P102, P101
Documents
Safety datasheet
PDF, 606,40 KB
Customers also bought
SIKA
Sikaflex - 291i Marine Sealant / Filler
from
€7
14
Mixing Cups with Lid
from
€0
80
SEATEC
EPOTEC Epoxy Primer
from
€22
65
€29.37
-23%
SEATEC
Epoxy Putty
from
€20
97
€26.85
-22%
SEATEC
Gelcoat
from
€24
33
€31.89
-24%
SEATEC
Glass fiber mat 300 g
from
€7
14
€9.20
-22%
SEATEC
Glass fabric 200 g
from
€9
20
€12.56
-27%
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
-
No questions asked yet. Be the first to ask a question!
