Article Number
26254
EAN
4260416460256
Model no.
26254
Description
SEATEC - Gelcoat
Colour code
RAL 9010
Contents
500
g
Product details
SEATEC polyester gelcoat forms a water-resistant top layer on GRP coatings and polyester putty layers. Apply only one layer. Consumption: 0.2 l / m2. Yield: approx. 200-300 g / m2.
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Harmful if swallowed.
May cause respiratory irritation.
Suspected of damaging fertility or the unborn child.
Harmful to aquatic life with long lasting effects.
May cause an allergic skin reaction.
Causes severe skin burns and eye damage.
Heating may cause a fire.
Contains (name of sensitising substance). May produce an allergic reaction.
Dispose of contents/container to …
Protect from sunlight.
Store locked up.
Store in a well-ventilated place. Keep cool.
Immediately call a POISON CENTER or doctor/physician.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Keep only in original container.
Keep/Store away from clothing/…/combustible materials.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
May cause respiratory irritation.
Suspected of damaging fertility or the unborn child.
Harmful to aquatic life with long lasting effects.
May cause an allergic skin reaction.
Causes severe skin burns and eye damage.
Heating may cause a fire.
Contains (name of sensitising substance). May produce an allergic reaction.
Dispose of contents/container to …
Protect from sunlight.
Store locked up.
Store in a well-ventilated place. Keep cool.
Immediately call a POISON CENTER or doctor/physician.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Keep only in original container.
Keep/Store away from clothing/…/combustible materials.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
H302, H335, H361, H412, H317, H314, H242, EUH208, P501, P410, P405, P403+P235, P310, P305+P351+P338, P303+P361+P353, P301+P330+P331, P280, P271, P234, P220, P210, P102, P101
Documents
Safety datasheet
PDF, 284,86 KB
Safety datasheet
PDF, 288,08 KB
Item no.: 26254
Item no.: 26254
Safety datasheet
PDF, 407,13 KB
Safety datasheet
PDF, 421,51 KB
Item no.: 26255
Item no.: 26255
Safety datasheet
PDF, 291,42 KB
Safety datasheet
PDF, 284,34 KB
Customers also bought
SIKA
Sikaflex - 291i Marine Sealant / Filler
from
€7
14
6 variants
Mixing Cups with Lid
from
€0
80
2 variants
Sanitation Hose with Barrier Layer
from
€20
97
3 variants
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from
€2
48
2 variants
-46%
INTERNATIONAL
MICRON 350 Self-Polishing Antifouling
€93.91
from
€50
38
11 variants
Similar items
NEW
YACHTCARE
Gelcoat Crack Repair / Cremeweiß RAL 9001
only
€9
20
NEW
YACHTCARE
Gelcoat Crack Repair / Reinweiß RAL 9010
only
€9
20
NEW
YACHTCARE
GELCOAT FARBE - PAINT
€21.05
from
€16
76
2 variants
WEST SYSTEM
G/flex 655-1 G/flex Epoxy Syringe
only
€15
08
59
YACHTCARE
VT Gelcoat Filler
only
€16
76
> 100
-22%
YACHTICON
Gelcoat Repair Filler / white
€11.72
only
€9
20
> 100
-22%
SEATEC
Epoxy Resin Repair Set, 250 g incl. Glass Fabric
€26.85
only
€20
97
> 100
MEGAFUSION Primer / gray
only
€24
33
1
WEST SYSTEM
G/flex 655-K Repair Kit
only
€50
38
11
YACHTCARE
PU Pigment Paste
from
€6
68
6 variants
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:
Andrew H.
asked
on Jan 20, 2020
hello, I have just purchased 2 of these, where can I find application instructions?
Answer:
Dear customer, the datasheet is available as a PDF on this page. Thanks.
Question:
António B.
asked
on Apr 16, 2021
Hi! I would like to know what quantity this product is, and if i can mix matt aditive color aditive with him, and if you do have some kind of matt aditive. Many thanks.
António Batel
Answers:
The can is 500 grams, and I mixed colour additive (yellow and brown) to make a cream colour. Remember to adjust the colour first, then only when you are happy with the colour do you add in the hardner catalysing component.
Thank you for your answer. I have a white fade color, I was thinking of making the white gelcoat with black to match it. Are you agree with this? Or should I get a yellow or brown instead?
For your situation black is probably better, my case the colour I needed to match was a cream, so of course needed the yellow brown.
I actually recommend getting several colours (they are not expensive), so you can play mixing.
In any case take a look at this video, he gives a really nice explanation on how to do it.
https://www.youtube.com/watch?v=yoURRmkD8MY
Ok i get it! And with matting additive, do you know something for that?
For matting additive I don't know, you'll have to check if the matting additive is chemically compatible with the gel coat. In my case I had only ordered the yellow from svb, locally for brown could only get a water base dye, I was worried but after some research found that it would be ok, the fact is it worked quite well. This is why I was saying get several colours, for example blue in your case may make sense. Then you will need some patience to very slowly add tiny bits of dye until the colour is the same. The matting effect may work just by the polishing work at the end of the process.
Thank you so much for your reply!! I think I go for the black and yellow too. The video really helps! Thank you!!
Question:
António B.
asked
on Apr 21, 2021
There is a need of apply pva to this gelcoat to not get stikhy? To get cured?
Thank you so much
Answer:
Hi! No, you only use the hardener provided and at 2% wait two days. then it will stay as a rock. Nice product!
Question:
António B.
asked
on Jun 23, 2021
Can we mix paint with this gelcoat? like for example toplac international? https://www.svb24.com/en/international-toplac-high-gloss-one-component-varnish.html
Answers:
Gelcoat is not to be mixed with paint.
Ok! Understand, tank you so much!
Question:
Jan B.
asked
on Nov 16, 2022
Do I need to add WAX to this product? I want to apply this inside the engine room and I don't want a sticky surface.
A gelcoat needs the wax to fully cure, so the final coat needs to have the wax in it. However, the gel will not properly bond with the coat below it unless you sand the surfacing wax off. A common practice when applying multiple coats is to use unwaxed gel at first, and use gel with wax added for the final coat.
Answer:
Dear Jan, you dont need any wax for this product. Please contact us for more information: info@svb24.com // Your SVB-team.
Question:
Joshua R.
asked
on Aug 8, 2023
i need gel coat for a 2008 bavaria 40 vision in blue and white any body know?
Answer:
Hello Joshua, these are the PU Pigment colours for Gelcoat: -#50298#- Yours SVB-Team.
Question:
Phillip E.
asked
on Aug 31, 2023
Can this product be applied by brush or roller? Or is it only a repair putty. I need to re apply gelcoat to bare GRP around new thru hull fittings.
Answer:
Hello Phillip, this is a putty for spatula. To get a suitable layer thickness, you have to spatula it. Yours SVB-team.
General question
Question:
Brian S.
asked
on Apr 23, 2023
Im not 100% sure on how this works .
Does it work straight out of can or do i have to mix things together ?
Will this fill in small spider cracks or where there was some filler before hand ?
Answer:
Hello Brian, It is a two component product. You need to mix the base and hardener together. Its for cracks and chip. For larger holes, please take first epoxy putty: -#24208#- and second the gelcoat. Yours SVB-team.