SEATEC EPOTEC Epoxy Primer
Article Number
24201
EAN
4260416460201
Model no.
24201
Description
SEATEC - EPOTEC epoxy primer
No. of components
2 components
Area of application
Above water, Below water
For substrate
GRP, Wood, Steel, Aluminium
Method of application
Roller, Brush
Osmosis prevention
Yes
Colour
White
Yield (theoretical)
5.63
m²
Overcoating intervals
See data sheet
SVB recommends the following for these items
Product details
Universal 2-component epoxy primer for use on GRP, steel, plywood or aluminium. Suitable as a primer and barrier for below or above the waterline. This water-vapor-tight primer has excellent adhesion properties and prevents corrosion on steel and osmosis on GRP surfaces (at least 5 coats required). SEATEC EPOTEC can be reworked with 1-component and 2-component coating systems and SEATEC antifouling. Yield: approx. 7.5 m2/l, colour: white.
Application
The surface must be dry, clean, free of grease and fully intact. Surface should also be roughened before applying the primer. Make sure to remove the sanding dust thoroughly. Then mix the base and hardener.
Application
The surface must be dry, clean, free of grease and fully intact. Surface should also be roughened before applying the primer. Make sure to remove the sanding dust thoroughly. Then mix the base and hardener.
- Processing / surface temperature: +10° C to +25° C
- Interval for overpainting on itself: min. 5 hours, max. 5 days (20 °C)
- Interval for overpainting with antifouling: between 4 and 24 hours (20 °C). The subsrate should be slightly sticky.
- Colour of the mixture: white
- Mixing ratio: Base: Hardener 2:1 by volume
- Pot life: approx. 20-30 minutes (20°C)
- Drying time: approx. 5 hrs. (20 °C)
- Yield: approx. 7.5 m²/l at 60 µm dry film thickness
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
Harmful to aquatic life with long lasting effects.
Causes serious eye damage.
Highly flammable liquid and vapour.
Dispose of contents/container to …
Store locked up.
In case of fire: Use … for extinction.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Do not breathe dust/fume/gas/mist/vapours/spray.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Contains epoxy constituents. May produce an allergic reaction.
May cause an allergic skin reaction.
Causes serious eye irritation.
May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
Harmful to aquatic life with long lasting effects.
Causes serious eye damage.
Highly flammable liquid and vapour.
Dispose of contents/container to …
Store locked up.
In case of fire: Use … for extinction.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Do not breathe dust/fume/gas/mist/vapours/spray.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Contains epoxy constituents. May produce an allergic reaction.
H315, H317, H319, H335, H373, H412, H318, H225, P501, P405, P370+P378, P305+P351+P338, P280, P271, P260, P210, P102, P101, EUH205
Documents
Safety datasheet
PDF, 755,18 KB
Safety datasheet
PDF, 689,05 KB
Accessories
Customers also bought
SIKA
Sikaflex - 291i Marine Sealant / Filler
from
€7
14
6 variants
Mixing Cups with Lid
from
€0
80
2 variants
-17%
SEATEC
GTI 30 Thin-Film Antifouling / graphite
€40.29
from
€33
57
2 variants
-26%
SEATEC
STANDARD PRO Self-Polishing Antifouling
€28.53
from
€20
97
8 variants
-23%
SEATEC
Epoxy Thinner
€26.01
only
€20
13
58
-22%
SEATEC
Epoxy Resin
€22.65
from
€17
61
3 variants
-22%
SEATEC
Epoxy Putty
€26.85
from
€20
97
2 variants
Similar items
NEW
SEAJET
Multipurpose 2-Component Epoxy Primer Spray
€26.01
only
€24
33
13
NEW
SEAJET
Multipurpose 2-Component Epoxy Primer
€52.06
from
€44
50
4 variants
NEW
SEAJET
015 Underwater Primer Spray
only
€17
61
11
NEW
SEAJET
015 Underwater Primer
€33.57
from
€31
05
2 variants
NEW
INTERNATIONAL
B-FREE CONVERSION COAT 2-Component Primer
€45.00
from
€41
97
2 variants
NEW
INTERNATIONAL
B-FREE TIECOAT 2-Component Primer
from
€50
38
2 variants
Zinc Primer Spray / 400 ml
only
€10
04
10
HEMPEL
2-Component Conversion Primer
from
€41
13
2 variants
SPRENGER
PROP SPRAY 400 ml / grey
only
€16
76
> 100
-44%
BOERO
MISTRAL FONDO Primer
€34.32
from
€19
29
2 variants
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:
Johann B.
asked
on Sep 24, 2021
does the epotec primer contain solvents? I want to put coppercoat over it, and the instructions state to NOT use a primer with solvents or wait 7 days until it evaporated.
Answer:
Dear customer, in this case its recommened to wait about a week after application to coat over.