The seaEQ-Pile-Hook-Strap can easily be tied and tightened around every square or round mooring pole. The hook can be affixed at two, three or four different positions (three versions) so it can be hung at the right place on the mooring pole. When leaving the berth, the mooring line can be quickly attached to the ample hook. And when you are berthing again, you can easily grab the lines. It’s very handy and safe. The aluminium hook is covered with polypropylene and robustly sewn in to prevent damages to your boat and lines.
With the strip you can easily attach the hook at the right position to the mooring pole. Just tighten and it’s already done. You do not need tools, you do not have to drill holes in the pole; your boat and the mooring pole will not be damaged. The seaEQ-Pile-Hook-Strap is literally easy going: you can take it with you and attach it to other mooring poles.
The hook is available in three sizes. For sizes cover round mooring poles with a Ø from 100 up to 450mm and square mooring poles with an edge length from 80 up to 350mm (see download: table with mooring pole measurements).
- Easy to attach to a mooring pole.
- NO DRILLING OR TOOLS NECESSARY!!!
- Quick to take along and attach when you’re going to a different berth.
- Optional: version with second hook.
- No damage to the mooring pole.
- Extremely safe.