RV-212 Bronze Thru-Hull Transducer Set

RV-212 bronze thru-hull transducer set for direct connection to your Raymarine AXIOM multifunction display. Lifelike clarity and optimally recognizable structures with RealVision 3D Sonar. The set contains two transducers, one for the starboard and one for the port side.
The RV-212 thru-hull transducer is a 4-channel, broadband CHIRP transducer with Down- and SideVision and a high-frequency CHIRP fish-searching function. In addition, the transducer measures the water temperature and transmits the data to the AXIOM for display.
A built-in attitude heading reference system (AHRS), which stabilizes the sonar images, makes it so you will always experience crisp images, even in moderate swell.


The thru-hull transducers are mounted through a hole in the hull with a supported deadrise of 6 - 18°. The RV-212 comes with a 2m Y-cable, an 8 meter extension cable and all mounting parts

Note:
The transducers must always be installed as a set and connected to the terminal. The use of a single RV-212 transducer is not possible.

RV-212 Features:

Installation	Thru-hull mounting
Material	Bronze
Max. depth	3D: 90m (300ft) / view down: about 180m (600ft) / port: about 90m (300ft) / starboard: about 90m (300ft) / cone: 270m (900ft)
Frequencies	RealVision & High CHIRP Fishfinder
Beam width (L/H)	3D: 180° / Down: 60° / Cone: 25°
Supported deadrise	6-18°
Data	Depth and temperature
Recommended hull material	Fiberglass / wood
Cable length	2m / 3ft Y-cable + extension cable 8m / 26ft

Compatible with the following Raymarine devices:

• Raymarine AXIOM RV
• Raymarine AXIOM Pro RVX

The transducer is not compatible with the Raymarine AXIOM DV and AXIOM Pro S series