RAYMARINE Autopilot EV-100 Hydraulic Sail Pack
Article Number
58842
EAN
00723193817308
Model no.
T70328
Description
RAYMARINE - Autopilot EV-100 Hydraulic Sail Pack
Drive type
Not specified
Type of drive
Hydraulic
SVB recommends the following for this item
Product details
Perfect for boats with a single outboard and hydraulic steering!
With the new Autopilot EVOLUTION from Raymarine, steering your boat becomes easier than before. Difficult calibration is no longer necessary. Due to the intelligent EV-sensor, the autopilot monitors multiple ship movements in all directions and automatically adjusts the steering to match existing sea conditions, without the user having to adjust any other settings. Safe arrival at the planned destination is guaranteed. A further big advantage of the autopilot is flexibility of installation. The device itself can be installed where it is easiest for you to access, while the EV-sensor can be mounted where it makes most sense to you, no matter if above or below deck. There are no restrictions concerning the installation compared to common heading sensors. The core of the sensor is water-protected to IPx6 and IPx7. Components are easily connected via SeaTalk and all cables required are included. The autopilot is NMEA2000 compatible.
With the new Autopilot EVOLUTION from Raymarine, steering your boat becomes easier than before. Difficult calibration is no longer necessary. Due to the intelligent EV-sensor, the autopilot monitors multiple ship movements in all directions and automatically adjusts the steering to match existing sea conditions, without the user having to adjust any other settings. Safe arrival at the planned destination is guaranteed. A further big advantage of the autopilot is flexibility of installation. The device itself can be installed where it is easiest for you to access, while the EV-sensor can be mounted where it makes most sense to you, no matter if above or below deck. There are no restrictions concerning the installation compared to common heading sensors. The core of the sensor is water-protected to IPx6 and IPx7. Components are easily connected via SeaTalk and all cables required are included. The autopilot is NMEA2000 compatible.
Included
- 0.5ltr Hydraulic Pump
- p70s Autopilot Control Head
- ACU-100 Drive Control Unit
- EV-1 Course Sensor
- 1 x SeaTalkng Power Cable
- 1 x SeaTalkng Backbone cable 5 m)
- 1 x SeaTalkng Spur Cable (1.0 m)
- 1 x SeaTalkng 5-way Connector Block
- 2 x SeaTalkng T-piece Connector
- 2 x SeaTalkng Terminator
Technical data - 0.5 litre hydraulic pump
| Power supply | 12 V |
| For cylinder volume | 50 - 110 ccm (3.1 - 6.7 in3) |
| Maximum flow rate (no load) |
600 ccm/min (36.6 in3/min) |
| Dimensions (h x w x d) | 203 x 103 x 89 mm |
Technical data - EV-1 course sensor
| Nominal on-board voltage | 12 V (power supply via SeaTalkng) |
| Operating voltage range | 10.8 to 15.6 V DC |
| Current consumption | 30 mA |
| Sensors | Three-axis digital accelerometer, Three-axis digital compass and three-axis digital angular rate sensor |
| Data connection | SeaTalkng |
| Operating temperature | -20 to +55 °C |
| Storage temperature | -30 to +70 °C |
| Relative humidity | max. 93% |
| Water rating | IPX6 |
| Diameter | 140 mm |
| depth | 35 mm (including housing) 95 mm (including bracket) |
| Weight: | 0.29 kg |
Technical data - p70s control unit
| Nominal voltage | 12 V DC |
| Voltage range | 9 to 16 V DC |
| Display Size | 3.5" |
| Display | Optically integrated, sunlight-readable LCD display |
| Resolution | 320 x 240 QVGA |
| Colours | 16 bit colour resolution (64,000 colours) |
| Colour palettes | Four colour palettes - two day, inverse and red/black |
| LCD brightness | 1;200 nit |
| Power consumption | 1:6 Watt |
| Connections | SeaTalk and SeaTalkng compatible with NMEA2000 marine networks |
| Operating temperature | -25º C to 55º C (-13º F to 131º F) |
| Storage temperature | -30º C to 70º C (-22º F to 158 ºF) |
| Relative humidity | Maximum 93 % |
| Waterproof to | IPX6 |
| Compliance | Europe: 2004/108/EC | Australia and New Zealand: C-Tick Compliance Level 2 |
| Included | Instructions, seal, display, sun cover, replacement frame, mounting screws |
Documents
Similar items
-8%
GARMIN
Reactor 40 Hydraulic Autopilot System / with GHC50, v2 SmartPump and Shadow Drive
€3,772.27
only
€3.470
55
-8%
GARMIN
Reactor 40 Hydraulic Autopilot System / with 1 L Pump, GHC50 and Shadow Drive
€1,999.16
only
€1.848
70
-9%
GARMIN
Reactor 40 Hydraulic Autopilot System / with GHC50 and 1L Hydraulic Pump
€1,747.06
only
€1.596
60
-10%
NAVICO
PUMP-4 Hydraulic Pump / 3.0 L / 12V
€1,279.00
only
€1.151
22
1
-10%
NAVICO
PUMP-3 Hydraulic Pump / 1.6 L / 12V
€879.00
only
€791
55
-10%
NAVICO
PUMP-2 Hydraulic Pump / 0.8L / 12V
€719.00
only
€647
02
1
-10%
NAVICO
PUMP-1 Hydraulic Pump for Outboard Steering
€659.00
only
€593
24
1
-10%
NAVICO
AP44 Autopilot Bundle / Hydraulic / with PUMP-3 1.6L pump - SteadySteer compatible
€3,027.50
only
€2.724
33
1
-10%
NAVICO
Outboard Autopilot Set incl. PUMP-1 Hydraulic Pump / Precision 9 Compass
€1,869.00
only
€1.680
63
-11%
NAVICO
Outboard Autopilot Set incl. PUMP-1 Hydraulic Pump / Point-1 GPS Antenna
€1,319.00
only
€1.176
43
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
No questions asked yet. Be the first to ask a question!