RAYMARINE Autopilot EV-100 Hydraulic Power Pack
RAYMARINE Autopilot EV-150 Hydraulic Pack
Complete autopilot system consisting of the EV1 course sensor, ACU-150 drive unit, p70Rs operating unit, hydraulic pump type 1 and EVOLUTION cable set.
RAYMARINE Autopilot EV200 Hydraulic Pack with S100 Radio Remote Control
The Raymarine EV-200 hydraulic pack precisely maintains course regardless of speed and sea conditions. The pack includes the ACU-200 course computer, p70R display, EV-1 course sensor, rudder angle sensor and a type 1 hydraulic pump suitable for cylinders between...
RAYMARINE Autopilot EV-200 Hydraulic Pack
Precise course control, regardless of the speed and sea conditions.
SVB recommends the following for this item
Product details
With the new Autopilot EVOLUTION from Raymarine, steering your boat becomes easier than before. Difficult calibration is no longer necessary. Due to the intelligent EV-sensor, the autopilot monitors multiple ship movements in all directions and automatically adjusts the steering to match existing sea conditions, without the user having to adjust any other settings. Safe arrival at the planned destination is guaranteed. A further big advantage of the autopilot is flexibility of installation. The device itself can be installed where it is easiest for you to access, while the EV-sensor can be mounted where it makes most sense to you, no matter if above or below deck. There are no restrictions concerning the installation compared to common heading sensors. The core of the sensor is water-protected to IPx6 and IPx7. Components are easily connected via SeaTalk and all cables required are included. The autopilot is NMEA2000 compatible.
Included
- 0.5ltr Hydraulic Pump
- p70Rs Autopilot Control Head
- ACU-100 Drive Control Unit
- EV-1 Course Sensor
- 1 x SeaTalkng Power Cable
- 1 x SeaTalkng Backbone cable 5 m)
- 1 x SeaTalkng Spur Cable (1.0 m)
- 1 x SeaTalkng 5-way Connector Block
- 2 x SeaTalkng T-piece Connector
- 2 x SeaTalkng Terminator
Technical data - 0.5 litre hydraulic pump
Power supply | 12 V |
For cylinder volume | 50 - 110 ccm (3.1 - 6.7 in3) |
Maximum flow rate (no load) |
600 ccm/min (36.6 in3/min) |
Dimensions (h x w x d) | 203 x 103 x 89 mm |
Technical data - EV-1 course sensor
Nominal on-board voltage | 12 V (power supply via SeaTalkng) |
Operating voltage range | 10.8 to 15.6 V DC |
Current consumption | 30 mA |
Sensors | Three-axis digital accelerometer, Three-axis digital compass and three-axis digital angular rate sensor |
Data connection | SeaTalkng |
Operating temperature | -20 to +55 °C |
Storage temperature | -30 to +70 °C |
Relative humidity | max. 93% |
Water rating | IPX6 |
Diameter | 140 mm |
depth | 35 mm (including housing) 95 mm (including bracket) |
Weight: | 0.29 kg |
Technical data - p70Rs control unit
Nominal voltage | 12 V DC |
Voltage range | 9 to 16 V DC |
Display Size | 3.5" |
Display | Optically integrated, sunlight-readable LCD display |
Resolution | 320 x 240 QVGA |
Colours | 16 bit colour resolution (64,000 colours) |
Colour palettes | Four colour palettes - two day, inverse and red/black |
LCD brightness | 1;200 nit |
Power consumption | 1:6 Watt |
Connections | SeaTalk and SeaTalkng compatible with NMEA2000 marine networks |
Operating temperature | -25º C to 55º C (-13º F to 131º F) |
Storage temperature | -30º C to 70º C (-22º F to 158 ºF) |
Relative humidity | Maximum 93 % |
Waterproof to | IPX6 |
Compliance | Europe: 2004/108/EC | Australia and New Zealand: C-Tick Compliance Level 2 |
Included | Instructions, seal, display, sun cover, replacement frame, mounting screws |
Documents
Accessories
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .