Programming Fee for Radios, AIS Transmitters and Tank Sensors
Devices by the following manufacturers can be programmed for a programming fee *:
- STANDARD HORIZON
- ICOM Radios
- AIS transmitters by other manufacturers
- KUS NMEA2000 Tank Sensor
- BEP-Marine All Purpose Tank Sensor TS1 (No. 14285)
Programming additional channels
Programming additional channels (e.g. Dutch channels 30, 31 and 37) can only be done for a fee.
Reprogramming or resetting an existing unit will incur higher costs. Please use our reprogramming service for this.
Customers also bought
Heavy-Duty Stainless Steel Hose Clamps
from €4 62 €4.88
Sanitation Hose with Barrier Layer
from €20 97
Wood Thru-Hull Plugs / Ø 10-40 mm
only €7 14
YACHTCARE LEAK HERO Sealant / 625 ml
only €30 21 €39.80
NMEA2000 NMEA2000 Starter Kit / Micro-C
only €109 20
PL Connector for RG58U Cable
only €2 48
Reprogramming for EPIRBs, Radios, AIS Transmitters and Tank Sensors
only €58 78
ICOM CT-M500 Wireless Interface-Box
only €159 62 €186.18
BANTEN Grounding Plate, Square / 300 x 80 x 13 mm
only €159 62 €264.00
BANTEN Grounding Plate, Square / 205 x 65 x 13 mm
only €100 80 €145.80
LNA-Sea-Band VOX Antenna Booster
only €201 64
SCANSTRUT DS21A-P-BLK Deck Seal / for 4-9 mm
only €24 33
SCANSTRUT DS-H10-BLK Cable Seal / for 6-10 mm
only €25 17
SCANSTRUT DS-H6-BLK Cable Seal / for 2-6 mm
only €18 45
STANDARD HORIZON CN-3 / Antenna socket adapter (SMA to BNC)
only €15 92
ICOM Cigarette Lighter Cable CP-23L
only €20 13 €21.66
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: firstname.lastname@example.org or by phone on: +49 (0)421 57290510 .
Bought July 2017 the Standard Horizon HX300E handheld marifoon. Apparently its delivered without channel 31. This is a constraint, as channel 31 is a standard channel for the harbours in Netherlands. Is there a possiblity to programm this myself?
Dear Walter, you have always to unlock the channels for Netherlands by products from germany. This is not possible by yourself because you need a special software for it. Your SVB-team.
Why is it necessary to programme tank sensor 14285?
Arne C. answered
on Nov 15, 2021
Hi Tony, it is preconfigured to 0-5V, Water, 2000mm depth of tank. so that it could proper work to the used medium, gauge etc....it must reprogramm to your individual behaviors
Thanks Arne, I understand now.