PRO SPORT 380 Tender / Rigid Floor / 4 Person / 3.79 m
But a successive product is available:
SEATEC PRO SPORT 380 Inflatable Boat / rigid floor / 4-person / 3.79 m
The RIB (RIB = Rigid Inflatable Boat) is the perfect combination between a classic inflatable and fully rigid boat. It brings together the best features of both designs without their respective disadvantages.
Product details
- 3 air chambers
- Flush "Halkey Roberts" - valve
- 2 sturdy, collapsible aluminum paddles with plastic sheaths
- 1 towing eye in the bow area
- 4 carrying handles, two on the stern, one on the bow
- Additional carrying rope on the inside of the stern
- Dual-sided grip cord
- Circumferential baseboard
- GRP transom with reinforcement for motor mounting
- Bailer in the transom
- Seating board
- Foot pump, carrying bag, repair kit
Color | Sand/white |
Bow Form | Modern (MX) |
Skirting boards | Type F in dark-grey/white |
Lifeline | Yes |
Seating board | 1 / 2 |
Towing eyes/Transport eyes | 1 / 3 |
Length | 3.79 m |
Width | 1.76 m |
Length (inner) | 2.72 m |
Width (inner) | 0.79 m |
Hose-Diameter | 47.5 cm |
Air chambers | 3 sections |
Pack size (L x W x H) | 342 x 122 x 51 cm / 138 x 52 x 77 |
Weight | 84.00 kg |
Air Pressure | 0.25 bar |
Max. Engine Power | 22.1 kW / 30 hp |
Max. Engine Weight | 90 kg |
Empfohlene Schaftlänge | Short shaft |
Payload | 720 kg |
Carrying capacity | 4 |
Note regarding the material:
The SEATEC rigid inflatable boats are made of a special 5 layer PVC (polyvinyl chloride) material. The base consists of a poly fiber (polyester) fabric lining. The fabric is made of 1100 Decitex and is thus very sturdy. The fabric is lined on the interior and exterior with a so-called adhesive layer. This layer serves as a substrate for the equally double-sided PVC coating. Thanks to the PVC coating, the dinghy is airtight and sturdy. Only first-rate PVC material is used, which has specially been developed for the production of dinghies and has proven its durability for years. The material strength is approx. 0.7 mm and the boat's skin weighs about 850 g/m². The material is made in Germany. Max. tensile force is approx. 2500 N/ 5 cm.
Documents
Accessories
See subsequent models of this product
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .