PHILIPPI Onboard System / Shore Panel Indicator Panel LAR
Item no.
33192
EAN
4250214631002
Model no.
010000231
Description
PHILIPPI - Onboard system / shore panel indicator panel LAR
Necessary accessories for this item
Product details
According to DIN EN ISO 13297, boats with a 230 V on-board power supply should be provided with an indicator that shows the correct electrical connection of the AC onboard system to the AC shore power (reverse polarity, protective earth conductor not connected). This small LAR mains control panel from PHILIPPI is easy to install and features two indicator lights to show the correct electrical connection between the shore power connection from the jetty and the on-board AC mains: The green light signals that everything is connected correctly and the red light indicates reverse polarity of the outer conductor (live L) and neutral (N).
Because the LAR indication panel detects a break in the protective earth conductor (PE), it is a useful addition to the function monitoring of galvanic isolators that are not "fail safe" certified. As soon as there is a break in the protective conductor (PE), both control LEDs light up.
Tech data
Notes
Installation notes
Ideally, the L and N connection cables of the LAR wiring system control panel should be connected upstream of the residual current circuit breaker (RCBO). The green/yellow PE protective conductor is connected to the protective conductor busbar in the shore connection unit.
This ensures that a polarity reversal is also displayed if the RCBO has tripped (for whatever reason).
If there is a galvanic isolator (zinc saver) on board, which can be found in the green/yellow PE cable between the shore power takeover and the shore connection unit if installed correctly, it is also monitored for continuity.
Philippi lar,polarity indicator,shore power,
Because the LAR indication panel detects a break in the protective earth conductor (PE), it is a useful addition to the function monitoring of galvanic isolators that are not "fail safe" certified. As soon as there is a break in the protective conductor (PE), both control LEDs light up.
Tech data
- Mains voltage 230V AC / 50 Hz
- Measuring error current 1.4 mA
- Dimensions: W 105 x H 52.5 x D 50 mm
Notes
- Not suitable for AC mains without protective earth.
- Connection requires a 3x 1.5 mm² cable and fully isolated flat connectors.
- Suitable for function checking of galvanic isolators that are not "fail safe" certified.
Installation notes
Ideally, the L and N connection cables of the LAR wiring system control panel should be connected upstream of the residual current circuit breaker (RCBO). The green/yellow PE protective conductor is connected to the protective conductor busbar in the shore connection unit.
This ensures that a polarity reversal is also displayed if the RCBO has tripped (for whatever reason).
If there is a galvanic isolator (zinc saver) on board, which can be found in the green/yellow PE cable between the shore power takeover and the shore connection unit if installed correctly, it is also monitored for continuity.
Philippi lar,polarity indicator,shore power,
Documents
Manual
PDF, 49,71 KB
Customers also bought
Draw Bucket
only
€15
92
> 100
GEDORE
Toolbox TOURING, 47 pcs
only
€403
32
5
Wide-Neck Canister
from
€33
57
2 variants
SIKA
Sikaflex - 290DC PRO Deck Joint Grouting / 300 ml
only
€20
13
> 100
-6%
MARINCO
High-Power Plug and Receptacle / 70 A / 3-pole
€71.25
only
€67
18
-9%
MARINCO
High-Power Socket / 70 A / 3-pole
€41.60
only
€37
77
4
DOMETIC
Thermostat Service Kit for VD Evaporators
only
€54
58
14
Universal Protective Cover for Flush USB Sockets
only
€2
48
36
-11%
Ceramic Fan Heater / 230 V / 1.5 kW / dark grey
€56.30
only
€50
38
> 100
Similar items
SIEMENS
Shore Power Unit with Arc Fault Detection Device (AFDD) and Residual current operated Circuit-Breaker with Overcurrent protection (RCBO)
only
€294
08
2
SIEMENS
Shore Power Connection Unit / 30 mA
only
€78
07
13
SIEMENS
Shore Connection Unit with Arc Fault Detection Device (AFDD) and Circuit Breaker (RCD/RCCB)
only
€193
24
7
PHILIPPI
LAE 113 Shore Connection Unit
only
€323
49
2
BAVARIA
AC Distributor with Inverter Input 230 V
only
€537
77
BAVARIA
AC Distributer EN-Base Module 230 V
only
€323
49
BAVARIA
Shore Power Supply Panel
only
€470
55
PHILIPPI
Shore Power Connection Unit LAE 100 / LAE 110
only
€189
03
4
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:
Matteo B.
asked
on Dec 17, 2023
good morning, is there any diagram/picture on how to wire the panel? its unclear to me where exactly to wire it, before or after the rcbo? the ground wire only after the galvanic isolator, correct?
thanks a lot
Answer:
Unfortunately, the manufacturer does not provide an exact connection diagram. Ideally, you should install L- and N- wires of the LAR shore power indicator panel before the RCBO and the PE ground wire after the galvanic insulator. This allows an indication of a polarity reversal, even if the RCBO has tripped (for whatever reason) and the function of the galvanic isolator will also be taken into account.