PHAESUN MPPT Western WMarine 10 Solar Regulator
Item no.
25790
EAN
8056095840122
Model no.
321024
Description
12 / 24V MPPT Buck Boost solar regulator - 10A
Solar regulator type
MPPT
Charging outputs
1
Nominal Power @ 12 V
120
W
Operating voltage
12 V, 24 V
Battery type
Lead-Acid, AGM, Gel, Lithium (LifePO4)
Product details
Thanks to its buck-boost MPPT technology, the WESTERN WMarine10 is an ideal charge regulator for small 12/24 volt marine / caravan or off-grid applications. Suitable for lead/acid, AGM, gel and LiFePO4 batteries. High-quality workmanship, quick installation, simple 2-button operation, intuitively clear display, programmable day/night detection and overload protection on consumer output. Just some of the highlights of this unique charging regulator!
The outstanding feature of the Wmarine 10 Buck-Boost MPPT regulator* is its ability to transform even very low module voltages below the battery voltage to the required battery charging voltage thanks to its integrated DC/DC converter. Other regulators only become active when the module voltage is a few volts above the battery voltage. The WMarine10 starts at 5 volts and is suitable for module voltages up to max. 40 Voc!
This is particularly interesting for partially shaded 12 V modules, as the module output voltage is too low for the usual downward regulators despite the module bypass diodes that may be present. The Wmarine 10 also performs well in transitional periods with low sunlight and poor lighting conditions, as well as when solar modules are operated in climatically hot environments, as output voltage is known to decrease with increased module temperature.
The WMarine10 is suitable for charging all types of lead/acid batteries (maintainable/maintenance-free with liquid acid, AGM and GEL) as well as LiFePO4 batteries. It has a charging output/battery connection. When it is connected to the battery, it automatically detects whether a 12 V or 24 V battery is being used.
An external temperature sensor with 2 m connection cable (included in delivery) monitors the battery temperature and ensures a temperature-compensated charging voltage (24 mV/°C). Thanks to a 2-pole screw-plug connection, the sensor can be easily connected to the controller. The small sensor itself is isolated and can be attached to the side of the upper third of the battery housing with insulating tape or directly to a pole terminal and fastened there with cable ties. A sensor that is not connected or a connection cable break is shown "-32°C" in the display.
The few necessary basic settings as well as switching to the different input and output display values (voltage, current, power, temperature) is done with 2 large keys (1 cm Ø).
The values are shown on a 46 x 28 mm LC display with clearly visible symbols, as well as text and numerical values.
The regulator has a programmable consumer output connection with 5 switching options for load currents up to 15 amps with overload and deep discharge protection. The consumer output connection can also be used in combination with the regulator's adjustable day/night detection. The switch-off and switch-on voltages can also be set. On a boat, the consumer output can be used, for example, for an anchor light or a cooler box (without battery deep discharge protection) in the caravan as a programmable night/orientation light, etc.
The WMarine 10 is quiet and efficient. There is no need for a fan for the small amount of heat generated during use. The solid aluminium housing is completely sufficient for this. There is enough space for the sophisticated electronics, for the 2-pole screw/plug connection of the temperature sensor and for the solid screw terminals, which can easily accommodate cable cross-sections of up to 10 mm². Housing dimensions: 160 x 135 x 50 mm, weight 515 g. The housing has four 4.5 mm drill holes for mounting, drill hole spacing: 149 x 125 mm.
Features at a glance
*Additional information about charge regulator technology
Depending on varying operating conditions such as light intensity or module and ambient temperature, the module current and voltage and thus the module power can change continuously. Power = voltage x current or Watt = volt x ampere.
The module output power is therefore not a static value. An MPPT charge controller searches continuously for the point at which the solar module delivers the maximum current and the maximum voltage (i.e.. the maximum power) (depending on its variable operating conditions). This point is called "Max. Power Point", MPP for short.
Due to the constant tracking of the MPP, an MPPT charge regulator can use the available power much more effectively than would be possible with a PWM regulator.
Most charge controllers are "buck regulators" whose solar input voltage must be a few volts above the battery voltage. This higher voltage is converted by a DC/DC converter to the required lower charging voltage, which also results in a higher charging current. A Buck-Boost MPPT regulator is a "buck-boost" regulator which can also use a module voltage below the battery voltage to generate a charging voltage.
Notes
The outstanding feature of the Wmarine 10 Buck-Boost MPPT regulator* is its ability to transform even very low module voltages below the battery voltage to the required battery charging voltage thanks to its integrated DC/DC converter. Other regulators only become active when the module voltage is a few volts above the battery voltage. The WMarine10 starts at 5 volts and is suitable for module voltages up to max. 40 Voc!
This is particularly interesting for partially shaded 12 V modules, as the module output voltage is too low for the usual downward regulators despite the module bypass diodes that may be present. The Wmarine 10 also performs well in transitional periods with low sunlight and poor lighting conditions, as well as when solar modules are operated in climatically hot environments, as output voltage is known to decrease with increased module temperature.
The WMarine10 is suitable for charging all types of lead/acid batteries (maintainable/maintenance-free with liquid acid, AGM and GEL) as well as LiFePO4 batteries. It has a charging output/battery connection. When it is connected to the battery, it automatically detects whether a 12 V or 24 V battery is being used.
An external temperature sensor with 2 m connection cable (included in delivery) monitors the battery temperature and ensures a temperature-compensated charging voltage (24 mV/°C). Thanks to a 2-pole screw-plug connection, the sensor can be easily connected to the controller. The small sensor itself is isolated and can be attached to the side of the upper third of the battery housing with insulating tape or directly to a pole terminal and fastened there with cable ties. A sensor that is not connected or a connection cable break is shown "-32°C" in the display.
The few necessary basic settings as well as switching to the different input and output display values (voltage, current, power, temperature) is done with 2 large keys (1 cm Ø).
The values are shown on a 46 x 28 mm LC display with clearly visible symbols, as well as text and numerical values.
The regulator has a programmable consumer output connection with 5 switching options for load currents up to 15 amps with overload and deep discharge protection. The consumer output connection can also be used in combination with the regulator's adjustable day/night detection. The switch-off and switch-on voltages can also be set. On a boat, the consumer output can be used, for example, for an anchor light or a cooler box (without battery deep discharge protection) in the caravan as a programmable night/orientation light, etc.
The WMarine 10 is quiet and efficient. There is no need for a fan for the small amount of heat generated during use. The solid aluminium housing is completely sufficient for this. There is enough space for the sophisticated electronics, for the 2-pole screw/plug connection of the temperature sensor and for the solid screw terminals, which can easily accommodate cable cross-sections of up to 10 mm². Housing dimensions: 160 x 135 x 50 mm, weight 515 g. The housing has four 4.5 mm drill holes for mounting, drill hole spacing: 149 x 125 mm.
Features at a glance
- MPPT buck-boost charge regulator for module voltages between 5 and 40 Voc
- Automatic detection of 12 V or 24 V battery voltage at startup
- Maximum module power: 120 Wp for 12V battery and 220 Wp for 24V battery
- One charge output is suitable for maintainable / maintenance-free lead / acid battery types, AGM, GEL and LiFePO4
- Temperature compensated charging voltage thanks to external battery sensor
- 48 LCD displays for input / output values (voltage, current, power), temperature or settings
- Simple 2-button operation
- Backflow-free due to integrated blocking diode
- Consumer connection with 18 programmable functions, max. 15 A load capacity with overload protection and battery deep discharge protection with adjustable switch-off and restart limit
- Over temperature protection
- Reverse polarity protection
- Aluminium metal housing IP20
- 10 mm² connection terminals
Battery nominal voltage 12V | Battery nominal voltage 24V | ||||||
Min | Type | Max | Min | Type | Max | ||
Battery voltage | Vbatt | 10 v | - | 16V | 20 v | - | 32V |
Open circuit voltage of the solar cell | Voc | 5 V | - | 40V | 5 V | - | 40V |
Module current | Imp | - | - | 10 A | - | - | 10 A |
Maximum power of the solar cell | Pmp | - | - | 120 W | - | - | 220W |
Output voltage at the consumer output | Vload | - | Battery voltage | - | - | Battery voltage | - |
Max. consumer output current | Iload | - | - | 15 A | - | - | 15 A |
Charging voltage at 25 ° C program SEAL (factory setting) | Veoc | 14.4 V | 28.8 V | ||||
Charging voltage at 25 ° C program FLOOD | Veoc | 14.8V | 29.6V | ||||
Charging voltage at 25 ° C program Li | Veoc | 14.0 V | - | 14.7 V | 28.0 V | 29.4 v | |
Compensation of Veoc depending on the temperature of the battery (Tbatt) | Vtadj | - | -24 mV / ° C | - | - | -48 mV / ° C | - |
Voltage Low Battery (adjustable) | VIb | 10.8 V | 11.4 V (factory setting) | 12.2 V | 21.6V | 22.8 V (factory setting) | 24.4 v |
Output Voltage Low Battery (adjustable) | Velb | 12.4V | 13.8 V (factory setting) | 13.8 V | 24.8 V | 27.6 V (factory setting) | 27.6V |
Voltage detection by day (adjustable) | Vday | 1.9V | 4.4V (factory setting) | 9.6 V | 1.9V | 4.4V (factory setting) | 9.6 V |
Voltage detection at night: Vnight = Vday - 1.3 V |
Vnight | 0.6V | - | 8.3 V | 0.6V | 8.3 V | |
Float tension (adjustable) | Vfit | 13.2 V | - | 14.4 V | 26.4 V | 28.8 V | |
Absorbtion time (adjustable) | Tabs | 1 h | 3 h (factory setting) | 8 h | 1 h | 3 h (factory setting) | 8 h |
Consumption | Iq | 12.7 mA (Vbat 14,0 V) |
17.7 mA (Vbat 28.0 V) |
||||
Operating temperature | Tamb | -10 ° C | 50 ° C | -10 ° C | 50 ° C | ||
Power loss | Ploss | 20 W | 29 W | ||||
Cross section at the terminals | 1 mm² | 10 mm² | 1 mm² | 10 mm² | |||
Degree of protection | IP20 | IP20 | |||||
Weight | - | 515 g | - | - | 515 g | - |
*Additional information about charge regulator technology
Depending on varying operating conditions such as light intensity or module and ambient temperature, the module current and voltage and thus the module power can change continuously. Power = voltage x current or Watt = volt x ampere.
The module output power is therefore not a static value. An MPPT charge controller searches continuously for the point at which the solar module delivers the maximum current and the maximum voltage (i.e.. the maximum power) (depending on its variable operating conditions). This point is called "Max. Power Point", MPP for short.
Due to the constant tracking of the MPP, an MPPT charge regulator can use the available power much more effectively than would be possible with a PWM regulator.
Most charge controllers are "buck regulators" whose solar input voltage must be a few volts above the battery voltage. This higher voltage is converted by a DC/DC converter to the required lower charging voltage, which also results in a higher charging current. A Buck-Boost MPPT regulator is a "buck-boost" regulator which can also use a module voltage below the battery voltage to generate a charging voltage.
Notes
- As soon as the charge regulator is disconnected from the battery, the kW display value for the solar input power is automatically cleared.
- The total kW value of the consumer output power can be deleted when the display is active by simultaneously pressing the two control buttons.
Documents
Datasheet
PDF, 4,36 MB
Brochure
PDF, 286,96 KB
Brochure
PDF, 286,17 KB
Certificate
PDF, 295,34 KB
Manual
PDF, 5,96 MB
Accessories
Automotive/ATO Blade Fuse / Single
from
€0
84
11 variants
Single Core Wires, tinned
from
€0
67
29 variants
-17%
YACHTICON
Multi Purpose Self-welding Tape / black
€9.62
only
€7
98
89
-17%
YACHTICON
Multi Purpose Self-welding tape / white
€9.62
only
€7
98
54
Professional Crimping Tool / 6 - 16 mm²
only
€47
86
2
Professional Crimping Tool / 0.5 - 6 mm²
only
€63
82
7
Cable Terminal Kits
from
€9
20
4 variants
Cable Ties
from
€4
16
11 variants
BLUE SEA
ATO In-Line Fuse Holder
only
€10
88
> 100
Adhesive Cable Tie Mounts
from
€4
16
2 variants
Professional Crimping Tool / red / 0.5 - 6 mm²
only
€31
89
9
3M
Insulating Tape SUPER 33+ 19 mm x 6 m
only
€5
00
81
Butt Cable Connector / red / 0.5 - 1.5 mm² / pack of 20
only
€2
86
> 100
Butt Cable Connector / blue / 1.5 - 2.5 mm² / pack of 15
only
€2
86
> 100
Butt Cable Connector / yellow / 2.5 - 6 mm² / pack of 10
only
€2
86
> 100
Ring Cable Terminal / red / 0.5 - 1.5 mm² / pack of 25
from
€2
86
2 variants
Ring Cable Terminal / red / 1.5 - 2.5 mm² / pack of 20
from
€2
86
3 variants
Ring Cable Terminal / yellow / 2.5 - 6 mm²
from
€2
86
5 variants
Installation Conduit
from
€0
84
4 variants
Customers also bought
-15%
YACHTICON
AQUA CLEAN without Chlorine / powder
€22.65
from
€19
29
2 variants
Stainless Steel Rubbing Strake / drilled
from
€8
36
7 variants
-7%
NOVITEC
Megapulse - Battery Refresher / 12 V
€58.78
only
€54
58
19
Adhesive Cable Tie Mounts
from
€4
16
2 variants
BLUE SEA
ATO In-Line Fuse Holder
only
€10
88
> 100
Mega LED 60 / BAY15D
only
€16
76
> 100
Stainless Steel Pipes V4A
from
€14
24
4 variants
-23%
SEATEC
EPOTEC Epoxy Primer
€29.37
from
€22
65
2 variants
SUNBEAM
TOUGH 21 W Solar Panel / FLUSH
only
€125
21
9
Similar items
NEW
SUNBEAM
MoonRay 320 MPPT Solar Charge Controller / 320W@12V max. PV power
only
€133
61
5
NEW
SUNBEAM
MoonRay 160 MPPT Solar Charge Controller / 160W@12V max. PV power
only
€91
60
3
NEW
SUNBEAM
Mini MPPT Charger / portable
only
€66
39
SUNWARE
FOX-062 Miniature Charge Controller / PWM / 6.6 A
only
€63
82
4
SUNWARE
FOX-360 V2.1 Solar Charge Controller / surface mount
only
€183
99
2
SUNWARE
FOX-260 V2.1 LCD Solar Charge Controller / surface mount
only
€168
03
2
SUNWARE
FOX-320 LED Solar Charge Controller / PWM
only
€99
96
1
SUNWARE
FOX-220 LED Solar Charge Controller / PWM
only
€82
31
1
-5%
VOTRONIC
Solar Charge Controller SR 350 Duo
€115.29
only
€109
20
VOTRONIC
Solar Charge Controller SR 230 Duo
only
€92
40
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!