OCEAN TECHNOLOGIES EVOLUTION Toilet Conversion Kit
Article Number
75009
EAN
8051588001684
Model no.
5600000112
Description
OCEAN TECHNOLOGIES - Conversion kit for manual marine toilet
Ø noise level
80.4
dB
Max. noise level
86.2
dB
Length
36
cm
SVB recommends the following for these items
Product details
Transform your manual marine toilet into a convenient electric toilet. This conversion kit is suitable for most marine toilets with 4-hole mounting (PAR / JABSCO, RM 69, TMC, Splash). Available for 12V and 24V DC.
- Length from front edge to rear edge: 370 mm.
- Hole size base/bowl: 67 mm
- Hole size base/floor: 144 mm
- Screw hole Ø (base / floor): 9 mm
- Screw hole Ø (base / WC): 5 mm
- Diameter of the base is 170 mm
- The width of the rear cover is 100 mm
- The cable has a length of approx. 230 mm.
- 4-hole mounting: bolt circle 95 mm, hole spacing opposite 100 mm.
- Hose length: 400 mm
- Power consumption: 12 V / 13 A / 24 V / 7 A
- Hose connection inlet: ¾ "/ outlet: 1" or 1½ "
- Suction height: 1.2 m, self-priming
- Drainage height: 5 m
NOTE!
We recommend a 25 A fuse for the 12 V on-board WC and a 12 A fuse for the 24 V on-board WC.
Accessories
-7%
OCEANAIR
DRYROLL
€50.34
only
€47
02
4
-5%
Heavy-Duty Stainless Steel Hose Clamps
€4.88
from
€4
62
24 variants
-31%
YACHTICON
Moist Paper / 44 Sheets
€3.99
only
€2
77
> 100
Sanitation Hose with Barrier Layer
from
€20
97
3 variants
Sanitation Hose
from
€7
14
3 variants
Stainless Steel Hose Clamps
from
€1
76
18 variants
-13%
YACHTICON
PURYSAN ULTRA
€12.56
only
€10
88
> 100
-6%
YACHTICON
PURYTEC Water Additive
€15.08
only
€14
24
84
YACHTICON
Marine Toilet Cleaner
only
€11
72
89
YACHTICON
PURY BLUE
only
€11
72
> 100
-15%
YACHTICON
Hose Free
€16.76
only
€14
24
> 100
OCEAN TECHNOLOGIES
Replacement electric motor for SPEEDFLUSH
from
€140
29
2 variants
Customers also bought
SIKA
Sikaflex - 291i Marine Sealant / Filler
from
€7
14
6 variants
Sanitation Hose with Barrier Layer
from
€20
97
3 variants
-10%
YACHTCARE
LEAK HERO Sealant / 625 ml
€33.45
only
€30
21
> 100
-26%
SEATEC
STANDARD PRO Self-Polishing Antifouling
€28.53
from
€20
97
8 variants
BAVARIA
Cover for Stern Shower
only
€7
14
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:
Ward S.
asked
on Jan 19, 2018
does this unit have a water-in from sea and pump out to flush toilet. I can only see one connection in the photo. The macerator outlet is obvious.
Regards Ward
Answer:
When you change the pump from manual to electric, the inlet and outlet tubes are the same, although of different sizes. The water inlet pipe has an arrow indicating the direction of water flow indicated on the pump. The outlet tube you must put an adapter to get the size of the outlet tube.
Question:
Ward S.
asked
on Jan 22, 2018
I can see the waste out, but cannot see how the water is taken in for the flush cycle???
have already e-mailed this question a few days ago but no response.
Answer:
On the side you cannot see on the photos there is the inlet for fresh water (saltwater). On the other side is a black hose connection where the white hose (comes with the delivery) you connect with the hose connection in the bowl for flush water. Below the black connection is a white triangular formed connection where you connect the waste hose.
Question:
Duarte A.
asked
on Apr 5, 2018
Hello,
Can you please tell me if this is compatible with the RM 69 toilet?
Thanks!
Answer:
Hello, as stated in the description: Suitable for most marine toilets with 4-holes mounting (PAR / JABSCO, RM 69, TMC, Splash). Thank you.
Answer:
Yes the conversion kit has a special mecerator pump.
Question:
Samuel M.
asked
on Mar 3, 2019
Is it possible to locate the input/output holes on the opposite side to what is pictured?
Answer:
No, the input and output holes cannot be swapped over to the opposite side.
Question:
Rodrigue Z.
asked
on Mar 3, 2019
I've installed the toilet. It is located aprox 2m below holding tank and 40cm above water line. I also installed a goose neck throught the inlet. When i pump all water out, by closing the inlet seacok, few hours later i find water in the toilet.
Do i need also a check valve on the outlet side?
Answers:
Dear Rodrigue, is that right, that you got a goose neck only for the fresh water, but not for the waste? Please have a look at our article -30133- You need a goose neck for the waste as well. / Your SVB-team.
But the exit goes to the holding tank that is above the toilet, and is ventilated.
how can i add a goose neck in this case?
Question:
Diogo S.
asked
on Jan 16, 2020
Is there a need to buy also a pump for the sea water inlet?
Answer:
Dear customer, please send your inquiry to info@svb24.com to check. Thanks.
Question:
Didier M.
asked
on Oct 22, 2021
Mon WC est déjà relié à une pompe. Serais-je obligé de connecté le moteur à l'eau de mer, ou est il possible de laisser l'entrée de l'eau sans branchement ?
Answers:
La prise d'eau doit être raccordée. Je dirigerais la sortie de votre pompe existante vers le kit de conversion et alimenterais l'entrée d'eau des toilettes à partir de là. J'ai connecté le kit de conversion à un système d'eau sous pression. Cela fonctionne parfaitement.
Merci...
Ça fonctionne bien effectivement et me permets de garder les deux interrupteurs actuels dont celui de remplissage.
Rapide et efficace ta réponse !
Est-ce le clapet anti-retour qui claque après une vidange ? Ça fait le même bruit qu'une goutte d'eau !
Question:
Rimantas S.
asked
on Nov 11, 2021
HI
I wonder would it fit my boat. I have some pictures, could upload if possible
Answer:
Dear customer, please send your inquiry to info@svb24.com to check. Thanks.
Question:
Marialberto M.
asked
on Nov 11, 2022
question related to OCEAN TECHNOLOGIES Toilet Conversion Kit:
the rinse water inlet to the pump from the seacock, which side of the electric motor is it?
is it on the the same side of the waste outlet or the opposite side?
I am asking this question as the flow arrow marked on the housing of the pump is confusing me.
Answer:
Dear Marialberto, the flow arrow is for the dishwater. So the intake side for the dishwater is the same side like the outside for the sewer pipe. This is logical for one reason, the thru-hulls are always one the same boatside, just on different heights. Hope we could help you. Your SVB-team.
Question:
Miro Z.
asked
on Feb 12, 2023
Hello,
I am interested in the difference between the conversion kit for marine toilets that you offer.
76922 - price 173,21 eur
76923 - price 163,98 eur
75009 - price 204,99 eur
I think there is no any difference between the items (in operation and purpos).
Thanks for your reply.
Miro
miro.zupevec@gmail.com
Answers:
Dear customer, the voltages are different and they are meant for different build years of toilets. Please confirm them with your toilet's specs. Thanks.
Dear Cory,
not true. The voltage is total same. Also dimensions is the same.
Please, give me corect answer.
Lp Miro
Question:
Dragos P.
asked
on Aug 12, 2023
Hi, How is this different from item 76922? Seem to have same dimensions. Thanks.
Answer:
Hello Dragos, the article -#76922#- is a updated version of the article -#75009#-. The pump and the base is different. Yours SVB-team.
Question:
ILIAS K.
asked
on Jan 28, 2024
Hi , I currently have jabsco manual , compact bowl ,does this fits the bowl ?Is the switch included?
No answers yet. Be the first to answer this question!