MCMURDO FastFind Crew1 AIS MOB Distress Beacon
Article Number
91035
EAN
4050269082091
Model no.
187207
Description
McMurdo FastFind Crew1 AIS MOB distress beacon
Tx power
2
W
Max. transmission time
36
h
Trigger
Manual
DSC
No
GPS
Yes
Bluetooth
No
Floatable
No
Emergency beacon
Yes
Suitable for life jackets
Yes
Height
12.9
cm
Width
52
mm
Depth
40
mm
Weight
160
g
Class M
No
Product details
The McMurdo FastFind Crew 1 AIS MOB beacon features semi-automatic triggering and a host of other functions to quickly identify the position of the person in distress and assist local rescuers in locating them. This AIS MOB beacon is compact and light, making it extremely easy to carry.
The FastFind Crew1 AIS transceiver features water and manual activation options. It boasts a high-powered battery for 36 hrs activation time. The high-strength LED signals SOS message to detect and aid rescue of the person in distress in low light.
Thanks to the robust housing construction, the AIS distress transmitter is waterproof with 50m immersion depth and designed for use on board. The McMurdo FastFind Crew1 AIS MOB should be part of every personal safety kit.
The FastFind Crew1 AIS MOB is supplied with a clip to attach the unit to a life jacket strap and an additional clip to attach the AIS beacon to the life jacket’s oral tube. This clip can be installed on either side of the mouthpiece.
Manual activation
Manual activation is done by pulling off the red antenna cap to release the antenna and then pulling the activation tab off. The AIS distress transmitter immediately starts to determine the position and then transmits the AIS alert message.
Automatic activation
To enable automatic activation, the red antenna cap must be removed beforehand to release the antenna. As soon as the water sensor embedded at the bottom side of the device comes is immersed in water for more than 3 seconds, the AIS distress transmitter is activated and then transmits the AIS alert message.
Features
Technical Data
The FastFind Crew1 AIS transceiver features water and manual activation options. It boasts a high-powered battery for 36 hrs activation time. The high-strength LED signals SOS message to detect and aid rescue of the person in distress in low light.
Thanks to the robust housing construction, the AIS distress transmitter is waterproof with 50m immersion depth and designed for use on board. The McMurdo FastFind Crew1 AIS MOB should be part of every personal safety kit.
The FastFind Crew1 AIS MOB is supplied with a clip to attach the unit to a life jacket strap and an additional clip to attach the AIS beacon to the life jacket’s oral tube. This clip can be installed on either side of the mouthpiece.
Manual activation
Manual activation is done by pulling off the red antenna cap to release the antenna and then pulling the activation tab off. The AIS distress transmitter immediately starts to determine the position and then transmits the AIS alert message.
Automatic activation
To enable automatic activation, the red antenna cap must be removed beforehand to release the antenna. As soon as the water sensor embedded at the bottom side of the device comes is immersed in water for more than 3 seconds, the AIS distress transmitter is activated and then transmits the AIS alert message.
Features
- Compact design
- Compatible with many life jackets
- Fast and precise GPS for location determination
- Semi-automatic activation option on water contact or manual
- Powerful SOS emergency light
- High battery capacity with a runtime of 36 hours at -10°C
- Waterproof to IP68 at a depth of up to 50 metres
Technical Data
| Frequency: | 161.975 MHz (AIS 1) 162.025 MHz (AIS 2) |
| Data rate: | 9,600 bps |
| Transmission power: | 2 watts |
| AIS message type | Message 1 (TXID, GPS Position, SOG, COG) Message 14 (MOB ACTIVE or MOB TEST |
| GPS channels: | 72 |
| GPS postion update: | One minute |
| Battery type: | Lithium (not rechargeable) |
| Operating time: | 36 hours at -10°C |
| Storage (battery life) | 5 years, replacement due after emergency use |
| Ambient operating temperature: | -20°C to 55°C |
| Storage temperature | -30°C to 70°C |
| Water rating: | IP68, immersion depth 50 m |
| Dimensions: | 129x52x40mm (L*W*D) |
| Weight: | 160 g (main unit only) |
| Delivery contents: | McMurdo FastFind Crew1 Belt clip Oral tube clip Instruction manual Self-test activation tab |
Documents
Datasheet
PDF, 1,72 MB
Similar items
NEW
MRT
sMRT ALERT AIS MOB Distress Beacon / Class M Approved
only
€310
88
WEATHERDOCK
easy2-MOB DSC AIS Emergency Transmitter / Automatic and Manual / Class M Approved
only
€300
80
WEATHERDOCK
easyRescue Pro3 - AIS Emergency Transmitter with DSC and Homing Function
only
€701
64
3
WEATHERDOCK
Holder for easyRescue Emergency Beacon
only
€22
65
2
WEATHERDOCK
Wall Holder for easyONE/easyTOO Emergency Transmitter
only
€23
49
5
-14%
ACR
AISLink MOB Beacon
€321.58
only
€277
27
-17%
WEATHERDOCK
Refit Kit for easyONE/easyTOO Emergency Transponder
€15.13
only
€12
56
19
OCEAN SIGNAL
AIS Alarm Box
only
€235
25
1
-7%
OCEAN SIGNAL
rescueMe AIS-MOB1 Emergency Beacon
€335.29
only
€310
88
7
-13%
EPIRB and PLB Programming Service
€38.57
only
€33
57
54
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
Technical question
Question:
Henning H.
asked
on Sep 15, 2022
What is the difference between McMurdo's FastFind Crew1 and McMurdo's Smartfind S20?
Thanks in advance for your answer.
Henning Husum
Answer:
Hi Henning,
kindly use our compare list in order to find out the differemces.
