OCEAN TECHNOLOGIES LED Searchlight / 12V/ wireless remote control
OCEAN TECHNOLOGIES LED Searchlight / 12 V / wired remote control
The innovative and powerful Ocean Technologies LED searchlight provides assistance with night-time activities, ensures safety on board and while sailing and features a stylish design. The searchlight is made of white ASA material and has excellent corrosion resistance....
OCEAN TECHNOLOGIES LED Searchlight / 24 V / wired remote control
The innovative and powerful Ocean Technologies LED searchlight provides assistance with night-time activities, ensures safety on board and while sailing and features a stylish design. The searchlight is made of white ASA material and has excellent corrosion resistance....
OCEAN TECHNOLOGIES LED Searchlight / 24 V / wireless remote control
The innovative and powerful Ocean Technologies LED searchlight provides assistance with night-time activities, ensures safety on board and while sailing and features a stylish design. The searchlight is made of white ASA material and is easy to operate with a...
SVB recommends the following for this item
Product details
The searchlight can be easily operated via a wireless remote control. The innovative and splash-proof design of this remote control means that it can be used either as a portable hand-held remote control or permanently mounted in a suitable location on the dashboard.
After switching on the operating voltage, the searchlight performs a self-test. During this time, all functions are blocked for approx. 6 seconds. After that, the searchlight can be controlled with the remote control. In addition to the ON/OFF button and the arrow buttons for right/left/up/down movements, there is another button for switching between high beam (10° light emission angle) and close-range illumination (60° light emission angle). When a button is pressed, a small red control LED lights up.
Only three fixing screws are required to mount the searchlight (not included). The only electrical work involved consists of connecting the operating voltage lines.
Delivery contents: Searchlight with base seal, remote control including batteries and fixing screws
General Specifications
Searchlight
- Light: LED
- Luminous intensity: 160,000 candela
- Voltage: 12 V
- LED current consumption @12 V: 2.2 A / 1.9 A
- Standby current consumption: 25 mA
- Max. range: up to 320 m
- Rotatable 320° horizontally and 75° vertically
- Lifetime: 7500 hours
- Brightness: Corresponds to a 200 W halogen lamp
- Dimensions: 230 x 185 x 210 mm
- Mounting: 3 holes, each 3.8 mm hole Ø
(Three half-round or flat-head screws required, not included in the delivery) - Remote control receiver is integrated into the housing
- Required fuse: 5 A
- Recommended wire cross-section for LED searchlight:
2.5 mm² up to 38 m total length of PLUS and MINUS connection cables,
4 mm² up to 50 m total length of PLUS and MINUS connection cables - Operating voltage connection cables are fitted with male and female round plugs.
Remote Control
- 433.92 Mhz, 4-channel
- Can be used as a hand-held remote control or for fixed installation
- Dimensions (LxWxH): 102 x 60 x 21 mm
- Mounting: 2 drill holes, the screw heads are covered by the upper part of the housing,
Drilling Ø 3.2 mm, hole spacing 94 mm
(2x half-round 3x18 mm screws are included) - Power supply: Two 12 V alkaline batteries, type 23A, 10 mm Ø x 28 mm
Note on changing the battery
- To open the remote control housing, insert a suitable tool (e.g. a 5 mm screwdriver) into the slot on the narrow side of the housing and carefully lift off the upper part of the housing.
- Replace discharged batteries with identical ones. Both battery PLUS poles must be touching the contact strip next to the red LED operation indicator!
Note on programming the remote control
A. Before programming
B. Programming
- Switch off the power to the searchlight or disconnect the searchlight from the power supply.
- Reapply power to the searchlight.
On the remote control, press the up and down arrow keys simultaneously within 5 seconds.
When the searchlight has recognised the remote control, it will light up briefly 1 to 4 times (depending on the number of remote controls learned, minimum one, maximum 4). - Wait until the searchlight has automatically completed the programming process or program another remote control within 5 seconds before performing any further operations.
The searchlight can be used with a maximum of 4 remote controls. If you try to program a fifth one, the first remote will be overwritten.
Documents
Customers also bought
Similar items
Comparison with other products
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .