MARCO UP2/E Electronic Drinking Water Pump

21 in stock
pcs.
SVB price: €145.34
You save: 9%
€160.00
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
pcs.
€145.34 This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
Buy
Available variants:
Image of Electronic Drinking Water Pump UP3/E

MARCO Electronic Drinking Water Pump UP3/E

High pressure and silent operation! Electronic pump with fully adjustable speed control and soft start. Pressure equalisation tank not required.

Image of Electronic Drinking Water Pump UP12/E

MARCO Electronic Drinking Water Pump UP12/E

High pressure and quiet operation! The electronic drinking water pump provides a continuously variable speed control and soft start. A pressure tank is not required.

Image of Electronic Drinking Water Pump UP6/E

MARCO Electronic Drinking Water Pump UP6/E

High pressure and quiet operation! The electronic drinking water pump provides a continuously variable speed control and soft start. A pressure tank is not required.

Item no.
52186
EAN
8022278605062
Model no.
16466015
Description
MARCO - UP2/E drinking water pump
Operating voltage
12 V, 24 V
Recommended fuse
7.5 A
Max. flow rate
10 l/min
Hose connection
1/2"
Hose connection
13 mm
Self-priming
Yes
Integrated pressure switch
Yes
Run dry safe
Yes
Max. number of taps
2
Switch-off pressure
2.1 bar
Switch-on pressure
1.7 bar
Thread
3/8"
Length
16.9 cm
Width
11.6 cm
Height
81 mm
Weight
1.3 kg
Pressure
2 bar
Pressure compensation tank necessary
No

Product details

Electronic pump with continuously variable speed control and soft start. Pressure is kept constant. No pressure-equalising tank required, which simplifies installation of a water system and reduces costs. The PTFE impellers ensure quiet operation and high pressure. No more pulsating water flow, water hammer and pressure fluctuations in the shower. LED function display on the pressure sensor. Multi-voltage 12 V / 24 V. The UP2 / E version is supplied without a filter.

Especially practical: A blue LED lights up when there is no water in the tank.

Documents

multi-flag Manual
PDF, 1,83 MB

What other SVB customers have to say

100% real reviews

42 customer reviews

4.1 (out of 42 ratings)
3 Stars
(5)
100% recommend SVB
  • Advantages
  • Noise Level (1)
  • Price/performance ratio (1)
  • Flow Rate (2)
  • Pressure (2)
  • Weight (2)
  • Quality (2)
  • Mounting/Installation (2)
  • Disadvantages
  • Noise Level (2)
  • Price/performance ratio (2)
J S.
by J S. Flag of Germany 5/27/2021 Verified purchase
Works well but is definitely not quiet!
Eckhardt L.
by Eckhardt L. Flag of Germany 5/17/2020 Verified purchase
Schwächliches Gerät, entspricht nicht den Leistungsangaben
I tried to use the pump for 2 taps, pantry and stern shower. The suction function is insufficient. Water only came to the stern shower when it was sucked in with the mouth on the shower head. This may be the case at the beginning of the season, but occurred again 10 minutes after switching off and switching on again. The output in the amount of funding does not correspond to the information. Installation instructions only in English. Good luck!
Gert  H.
by Gert H. Flag of Portugal 1/2/2015
Marco Pumpe
I bought this pump for the freshwater supply on board, because it as a gear pump promised a quiet run and because it should also be designed for 24 V operation. It replaced a 25 year old very loud fresh water pump. After installation of the pump I have three days at the quiet running and the efficiency of this pump pleased. Then the batteries had to be charged. Since the boat lay on a buoy, this happened with a Honda Benzingenerator. Chargers for mobile phones and cameras always surpassed this procedure without problems. Only the Marco pump went then no more. Too bad. I sent her about a month ago back to SVB but until now nothing has been heard. This pump is in my opinion not suitable for the 24V operation.
View all ratings

Rate product

How would you rate this product?
Disappointed
Completely fails to meet my expectations
Poor
Only some expectations are met
OK
Meets my basic expectations
Good
Slightly better than my general expectations
Excellent
Fully exceeds my expectations
Click on the stars to rate

Comparison with other products

1
This product
2
3
4
Item no.
52186
52185
52205
52196
Customer ratings
(42)
(31)
No rating yet
(1)
Description
MARCO - UP2/E drinking water pump
MARCO - UP3/E drinking water pump
UP12/E
UP6/E
Width
11.6 cm
18.7 cm
21.2 cm
21.3 cm
Height
81 mm
98 mm
11.3 cm
10.9 cm
Recommended fuse
7.5 A
15 A
25 A
20 A
Pressure
2 bar
2.5 bar
2.5 bar
2.5 bar
Weight
1.3 kg
2 kg
4.4 kg
3.7 kg
Length
16.9 cm
15.7 cm
25 cm
23.7 cm
Switch-off pressure
2.1 bar
2.6 bar
2.6 bar
2 bar
Switch-on pressure
1.7 bar
2.2 bar
2.2 bar
1 bar
Max. flow rate
10 l/min
15 l/min
36 l/min
26 l/min
Max. number of taps
2
3
3
3
Run dry safe
Availability / Price
21 in stock
only €145 34
Buy now
31 in stock
only €226 85
Buy now
Only 4 in stock
only €600 80
Buy now
25 in stock
only €457 94
Buy now

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Deutsch
  • Flag of Français

Technical question

Question:
User image of Radim Z.
Radim Z. asked
on Apr 25, 2019
Flag of English hello, we are looking for a quiet automatic salt water pump for flushing 4 toilets and possibly deck washing. one of the Marco pumps if the automatic one can handle salt water. thanks, Radim
Answer:
User image of Cory V.
Cory V. answered
on Oct 6, 2022
Dear customer, please email info@svb24.com for technical support in this case.