Connect up to two digital and five analogue sensors of the following types:
Rudder angle sensors
Fuel tank sensor
Fresh water sensor
Waste water sensor
Fuel flow sensor
Oil pressure sensor
Oil temperature sensor
Engine temperature sensor
Alarm signal sensor
Quick & easy to programme thanks to WiFi and NMEA2000
Quickly and easily configure the LXNAV SMARTEMU's inputs to the respective connected sensor via WiFi.
The SMARTEMU supports more than 60 different sensor types, including the most common European, American and Asian sensors. SMARTEMU can be configured for the following output types:
- Sensors with voltage output (0 - 5V and 0 - 18V)
- Sensors with resistance output (3 - 180 ohms, 2 - 90 ohms, 240 - 33 ohms, 105 - 5 ohms)
- Sensors with current output (4-20 mA)
Data can be conveniently displayed via the WiFi interface and further parameters such as RPM speed factor and type of flow rate sensor can be configured. Measured values can also be calibrated via the WiFi interface.
Firmware updates can also be done using WiFi.
Supported NMEA2000 data sets
Selection of NMEA2000 PGN (transmit).
|127488||Engine parameters, rapid update|
|127489||Engine parameters, dynamic|
|127493||Engine transmission parameters|
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: email@example.com or by phone on: +49 (0)421 57290510 .