LED Strip 12 V DC / 5 m

Thanks to the adhesive backing, this LED strip can be used in a variety of places while creating a pleasant ambience with warm white lighting. Power supply: 12 V DC. Consumption: 3.1 w/m. Length: 5 m. To operate the LED strip, an optional LED voltage regulator (50 watts) is required. Can be cut with scissors every 5 cm.


Technical specifications

• Power consumption at 12 V: approx. 1.3 A (about 15.6 watts)
• Power consumption per meter: 0.26 A (about 3.1 watts)
• Dimensions (WxHxL): 9 x 3.5 x 4920 mm)
• Length of connecting cables incl. plug contacts: approx. 10 cm

Note
Connecting cables with plug contacts (1x plug, 1x coupling) are located on both ends of the LED strip.
These can be used to connect a maximum of two LED strips or can be easily cut to connect the LED strip with open cable ends to the circuit.
Cable white/red = Positive 12 V / cable white = Negative.

The LED strip can be shortened as needed with sharp scissors on the designated markings.

If you decide not to use the entire LED strip, a 15 watt LED voltage regulator might suffice.
Required minimum capacity of the voltage regulator = 3.1w/m x cable length (in meters).