7 left in stock
pcs.
SVB price: €184.83
You save: 15%
€218.00
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
pcs.
€184.83 This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
Buy
Item no.
44439
EAN
8053670380820
Model no.
SED00033AA
Description
isotherm - Smart Energy Control

Product details

You have a cooling unit with Danfoss DC compressor or are planning to buy one? Our smart energy control kit might be just the perfect device for you helping you save up to 50% energy!
This kit saves energy thanks to two functions:
1. Undercooling, i.e. as long as shore power is connected or the running engine feeds the batteries, the chilled goods will be cooled down to +1°C. When the cooling unit is only operated by battery, the smart energy control adjusts the cooling temperature to +7°C – a lot less energy will be required to keep the temperature as the chilled goods will slow down the temperature increase.
2. The "energy saver" is an intelligent control of the compressor. The device continuously modifies the rotation speed of the compressor depending on the requested cooling performance and the availability of electric power.
The kit consists of the controller with processor, that can be configured via DIP switches and via the temperature preselection. It also allows easy retrofit because it replaces the existing control unit. Can be used with 12 and 24 V.
In the box are: Controller (blue) with DIP switches, temperature pre-selector with housing and dable harness, cover for the temperature sensor, self-adhesive aluminium mounting foil, sealing compound, manual.
Dimensions (L x W x H):
Controller (blue) 109 x 51 x 28 mm
Sensor bracket (white) 130 x 32 x 9 mm
Temperature preselector 82 x 76 x 62 mm
Mounting hole spacing 65mm, drilling-Ø 3mm
Cable length
Lighting (yellow / green) aprox 250mm
Connection controller (white) aprox 1500mm
Temperature sensor (black) aprox 1950mm

Note on compatibility
Compatible with all cooling systems with Secop / Danfoss DB35 or DB50 compressor and Danfoss 101N0210/220/230 electronic control with visible evaporator.

Documents

en-flag Manual
.PDF, 7,25 MB
Item no.: 44439
de-flag Manual
.PDF, 5,43 MB

What other SVB customers have to say

100% real reviews

15 customer reviews

Rolf J.
by Rolf J. Flag of Germany 7/20/2021 Verified purchase
Funktionalität ist top, Anschlusstechnik verbesserungswürdig
After 2 weeks of continuous use on a sailing boat on vacation (daytime temperatures up to 30 degrees), I can only say that my expectations have been exceeded. The control kit is an absolute improvement for our cool box, BUT. the installation is more difficult than expected! The control kit serves as an upgrade for the previous control (the compressor is installed in the locker). The cable of the new temperature controller is only about half as long as that of the old controller. A simple exchange was therefore not possible, a new installation location and cable laying was the order of the day. And the product video is a joke in my opinion! Where on board is it possible to put the refrigerator in front of you comfortably and install everything without twisting it - it felt like I was lying in the locker for half a day and pulling new cables. So there are point deductions because of the shortened cable and video
Thomas V.
by Thomas V. Flag of Germany 5/31/2020 Verified purchase
This control should not be missing from refrigerators, especially when energy is limited! Processing and pre-assembly are good, but the Microdip switches are so micro that it is an impertinence. Position Hardly recognizable! and absolutely bad
Dip switches too small !! Have to worry about damaging them in the course of the ongoing calibration! In addition, because there is still a protective film over it? And in the description no indication of it and the way of operating the dip. Here, larger, clearer dip really make sense !!
Axel J.
by Axel J. Flag of Germany 1/17/2018 Verified purchase
Plug contacts fit only with great effort on the compressor counterpart.
View all ratings

Rate product

How would you rate this product?
Disappointed
Completely fails to meet my expectations
Poor
Only some expectations are met
OK
Meets my basic expectations
Good
Slightly better than my general expectations
Excellent
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Deutsch
  • Flag of Français

Technical question

Question:
User image of Samuel C.
Samuel C. asked
on Nov 13, 2019
Flag of English Hi, Is this smart energy control kit compatible with and easy to install into my drawer type DR 65 Isotherm fridge? Regards, Uel
Answer:
User image of Cory V.
Cory V. answered
on Oct 6, 2022
Dear customer, please email info@svb24.com for technical support in this case.