You have a cooling unit with Danfoss DC compressor or are planning to buy one? Our smart energy control kit might be just the perfect device for you helping you save up to 50% energy!
This kit saves energy thanks to two functions:
1. Undercooling, i.e. as long as shore power is connected or the running engine feeds the batteries, the chilled goods will be cooled down to +1°C. When the cooling unit is only operated by battery, the smart energy control adjusts the cooling temperature to +7°C – a lot less energy will be required to keep the temperature as the chilled goods will slow down the temperature increase.
2. The "energy saver" is an intelligent control of the compressor. The device continuously modifies the rotation speed of the compressor depending on the requested cooling performance and the availability of electric power.
The kit consists of the controller with processor, that can be configured via DIP switches and via the temperature preselection. It also allows easy retrofit because it replaces the existing control unit. Can be used with 12 and 24 V.
In the box are: Controller (blue) with DIP switches, temperature pre-selector with housing and dable harness, cover for the temperature sensor, self-adhesive aluminium mounting foil, sealing compound, manual.
Dimensions (L x W x H):
Controller (blue) 109 x 51 x 28 mm
Sensor bracket (white) 130 x 32 x 9 mm
Temperature preselector 82 x 76 x 62 mm
Mounting hole spacing 65mm, drilling-Ø 3mm
Lighting (yellow / green) aprox 250mm
Connection controller (white) aprox 1500mm
Temperature sensor (black) aprox 1950mm
Note on compatibility
Compatible with all cooling systems with Secop / Danfoss DB35 or DB50 compressor and Danfoss 101N0210/220/230 electronic control with visible evaporator.