VC OFFSHORE EU Hard Antifouling
SVB recommends the following for these items
- Processing temperature: +5° C to +35° C
- Drying time at 15 °C: 30 minutes (dust dry)
- Overcoating time at 15 °C: min. 1.5 hours
Can be applied to most antifoulings provided they are in good condition. Not to be used in combination with PTFE-containing antifoulings.
GRP/Bare gelcoat: Make sure the surface is clean, dry and dust-free, and in a generally good condition. Use VC General Thinner for degreasing. Lightly sand with 240 grade paper. Rinse with fresh water and allow to dry. Use VC TAR2 to prime and protect against osmosis. Repeat the double coating every 12 months.
Steel/lead: Make sure the surface is clean, dry, dust-free and in a generally good condition. Use VC General Thinner for degreasing. Prime with VC TAR2 to protect against corrosion. Then apply two coats of VC OFFSHORE EU to the surface. Repeat the double coating every 12 months.
Wood: Make sure that the surface is clean, dry as well and dust-free and in generally good condition. Use VC General Thinner for degreasing. Prime with Primocon. Then apply two coats of VC OFFSHORE EU to the surface. Repeat the double coating every 12 months.
Not suitable for use on aluminium or galvanised surfaces.
This product may not be shipped to the Netherlands and Finland.
These products may not be used in the above mentioned countries.
Use biocidal products with care. Please read the instructions before use.
Sold only to retail customers in standard commercial quantities.
Please note the following hazard warnings:
Harmful if inhaled.
Harmful if swallowed.
Toxic to aquatic life with long lasting effects.
May cause damage to organs through prolonged or repeated exposure.
May cause respiratory irritation.
May cause an allergic skin reaction.
Causes skin irritation.
Causes serious eye irritation.
Flammable liquid and vapour.
Causes serious eye damage.
Dispose of contents/container to …
Do not breathe dust/fume/gas/mist/vapours/spray.
If medical advice is needed, have product container or label at hand.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Take off contaminated clothing and wash before reuse.
IF ON SKIN:
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Read label before use.
Keep out of reach of children.
Customers also bought
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: email@example.com or by phone on: +49 (0)421 57290510 .