INTERNATIONAL ULTRA 300 Hard Antifouling
SVB recommends the following for these items
Product details
Highly effective, powerful antifouling with effective protection from organisms such as algae. Suitable for professional and non-professional use on ships in fresh and salt water. The hard, abrasion resistant surface provides protection for up to one year. ULTRA 300 is suitable for polishing to obtain a smoother surface for less friction in the water and can be scrubbed and cleaned as required. Ideal for fast motor boats. Yield: 10 m²/l.
Processing instructions
Technical Data
- Processing temperature: +5° C to +35° C
- Drying time at 15 °C: 45 minutes (dust dry)
- Overcoating time at 15 °C: min. 10 hours
Can be applied to most antifoulings provided they are in good condition. Not to be used in combination with VC17m or PTFE-containing antifoulings.
For coated surfaces
- In good condition: Remove all fouling, contamination and paint residue and then wet sand with 80-120 grit sandpaper (do not dry!). If the old antifouling is incompatible or unknown, seal with a suitable barrier coat.
- In poor condition: Use Interstrip to remove any antifouling residue from the surface to be coated.
GRP/Blank gelcoat: Degrease the surface with Thinner No. 3. Clean well and allow to dry. Coat the surface to be treated with Gelshield 200 (osmosis protection) or with Primocon. Then apply two coats of ULTRA 300. Renew every 12 months.
Wood: Degrease the surface with Thinner No. 3. Clean well and allow to dry. Prime the substrate with Interprotect or Primocon. Then apply two coats of ULTRA 300. Renew every 12 months.
Steel/lead: Degrease the surface with Thinner No. 3. Clean well and allow to dry. Prime the substrate with Interprotect or Primocon. Then apply two coats of ULTRA 300. Renew every 12 months.
Not suitable for use on aluminium or galvanised surfaces.
These antifoulings / paints may not be delivered by us to Switzerland, the Netherlands and Belgium.
Use biocidal products with care. Always read the label and product information prior to use.
Sale to end consumers only and in conventional quantities.
Product safety
Please note the following hazard warnings:
May cause an allergic skin reaction.
Very toxic to aquatic life with long lasting effects.
Flammable liquid and vapour.
Causes serious eye damage.
Dispose of contents/container to …
Take off contaminated clothing and wash before reuse.
Immediately call a POISON CENTER or doctor/physician.
IF IN EYES:
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF ON SKIN:
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Keep cool.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Read label before use.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Documents
Item no.: 40783
Accessories
Customers also bought
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .