Item no.
40780
EAN
5035686052093
Model no.
YBB728/750AZ
Description
INTERNATIONAL - ULTRA 300
Antifouling type
Hard antifouling
Colour code
YBB728
Area of application
Salt water, Fresh water, Brackish water / Mixed operation
Hull material
GRP, Wood, Steel
Method of application
Roller, Brush, Spray gun
Biocide-free
No
Immersion after
12
h @ 15 °C
Max. time before immersion
6 months
Yield (theoretical)
7.5
m²
BAuA-No.
N-68947
No. of coats (recommended)
2 - 3
SVB recommends the following for these items
Product details
Highly effective, powerful antifouling with effective protection from organisms such as algae. Suitable for professional and non-professional use on ships in fresh and salt water. The hard, abrasion resistant surface provides protection for up to one year. ULTRA 300 is suitable for polishing to obtain a smoother surface for less friction in the water and can be scrubbed and cleaned as required. Ideal for fast motor boats. Yield: 10 m²/l.
Processing instructions
Technical Data
- Processing temperature: +5° C to +35° C
- Drying time at 15 °C: 45 minutes (dust dry)
- Overcoating time at 15 °C: min. 10 hours
Can be applied to most antifoulings provided they are in good condition. Not to be used in combination with VC17m or PTFE-containing antifoulings.
For coated surfaces
- In good condition: Remove all fouling, contamination and paint residue and then wet sand with 80-120 grit sandpaper (do not dry!). If the old antifouling is incompatible or unknown, seal with a suitable barrier coat.
- In poor condition: Use Interstrip to remove any antifouling residue from the surface to be coated.
GRP/Blank gelcoat: Degrease the surface with Thinner No. 3. Clean well and allow to dry. Coat the surface to be treated with Gelshield 200 (osmosis protection) or with Primocon. Then apply two coats of ULTRA 300. Renew every 12 months.
Wood: Degrease the surface with Thinner No. 3. Clean well and allow to dry. Prime the substrate with Interprotect or Primocon. Then apply two coats of ULTRA 300. Renew every 12 months.
Steel/lead: Degrease the surface with Thinner No. 3. Clean well and allow to dry. Prime the substrate with Interprotect or Primocon. Then apply two coats of ULTRA 300. Renew every 12 months.
Not suitable for use on aluminium or galvanised surfaces.
These antifoulings / paints may not be delivered by us to Switzerland, the Netherlands and Belgium.
Use biocidal products with care. Always read the label and product information prior to use.
Sale to end consumers only and in conventional quantities.
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Flammable liquid and vapour.
Causes skin irritation.
May cause an allergic skin reaction.
Very toxic to aquatic life with long lasting effects.
Causes serious eye damage.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep cool.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN:
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF IN EYES:
Immediately call a POISON CENTER or doctor/physician.
Take off contaminated clothing and wash before reuse.
Dispose of contents/container to …
Causes skin irritation.
May cause an allergic skin reaction.
Very toxic to aquatic life with long lasting effects.
Causes serious eye damage.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep cool.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN:
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF IN EYES:
Immediately call a POISON CENTER or doctor/physician.
Take off contaminated clothing and wash before reuse.
Dispose of contents/container to …
H226, H315, H317, H410, H318, P101, P102, P103, P210, P235, P273, P280, P302, P303+P361+P353, P305, P310, P362, P501
Documents
Datasheet
PDF, 149,43 KB
Safety datasheet
PDF, 188,97 KB
Datasheet
PDF, 203,33 KB
Datasheet
PDF, 523,13 KB
Manual
PDF, 3,12 MB
Safety datasheet
PDF, 206,36 KB
Datasheet
PDF, 197,66 KB
Safety datasheet
PDF, 203,08 KB
Item no.: 40783
Item no.: 40783
Safety datasheet
PDF, 200,53 KB
Safety datasheet
PDF, 194,80 KB
Accessories
INTERNATIONAL
GELSHIELD 200 Two-Component Epoxy Primer
from €26
85
€48.85
-45%
INTERNATIONAL
Thinner No.3
only €16
76
€29.24
-43%
INTERNATIONAL
PRIMOCON One-Component Primer and Barrier
from €20
97
€35.48
-41%
INTERNATIONAL
INTERPROTECT Two-Component Primer for Above & Below Waterline
from €28
53
€49.09
-42%
INTERNATIONAL
SUPER CLEANER
only €9
20
€13.56
-32%
YACHTCARE
Dust Cloth
only €3
32
3M
Premium Respirator Mask
only €8
36
3M
Safety Goggles
only €11
72
3M
Protective Overall
from €14
24
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from €2
18
Antifouling Flat Brush
from €2
10
Paint Set / Roller, Handle and Tray
only €2
44
Customers also bought
INTERNATIONAL
PRIMOCON One-Component Primer and Barrier
from €20
97
€35.48
-41%
INTERNATIONAL
GELSHIELD 200 Two-Component Epoxy Primer
from €26
85
€48.85
-45%
INTERNATIONAL
VC 17m Thin Film Antifouling
from €36
09
€100.03
-64%
INTERNATIONAL
2-Component VC TAR2 Epoxy Primer
from €35
25
€65.20
-46%
INTERNATIONAL
Thinner No.3
only €16
76
€29.24
-43%
Similar items
BOERO
SCIROCCO 622 PLUS Hard Antifouling
from €37
77
€85.75
-56%
BOERO
ALTURA 619 PLUS Hard Antifouling
from €47
02
€112.89
-58%
HEMPEL
Hard Antifouling ECOPOWER RACING
from €30
21
SEATEC
SPRINT PRO Hard Antifouling
from €28
53
SEATEC
GTI 30 Thin-Film Antifouling / graphite
from €30
21
HEMPEL
HARD RACING Antifouling with TecCel
from €37
77
INTERNATIONAL
VC OFFSHORE EU Hard Antifouling
from €41
13
€91.97
-55%
INTERNATIONAL
VC 17m Thin Film Antifouling
from €36
09
€100.03
-64%
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
-
No questions asked yet. Be the first to ask a question!