Sign up now for our WhatsApp newsletter and receive a FREE SVB set of playing cards!

TOPLAC PLUS High Gloss One-Component Boat Paint

 View Ratings (0) Questions (0)
Add to wish list
Reset image position
Close
Back
TOPLAC PLUS High Gloss One-Component Boat Paint Image 1 of 4
TOPLAC PLUS High Gloss One-Component Boat Paint Image 1 of 4
TOPLAC PLUS High Gloss One-Component Boat Paint Image 2 of 4
TOPLAC PLUS High Gloss One-Component Boat Paint Image 3 of 4
TOPLAC PLUS High Gloss One-Component Boat Paint Image 4 of 4
This product is no longer available.

Product details

TOPLAC PLUS one component premium boat paint is suitable for all boat materials above the waterline, and has improved aesthetics and flow in comparison with other conventional paints and excellent flow properties. Featuring a new formula, TOPLAC PLUS eliminates the need for tipping when using a roller. The high-gloss varnish also has excellent gloss retention qualities without yellowing. TOPLAC PLUS can be applied using a brush or roller and has improved flow and levelling. Suitable for a range of surfaces including aluminium, iron, carbon fibre, GRP, steel, lead, wood and stainless steel. Yield: 13.33 m²/litre. Suitable thinner: No.100.
Dilute 0-10% for easier processing. Above 25° C, add an additional 5% thinner.

Processing instructions:

For coated surfaces:
  • In good condition: Wash down with a suitable detergent, rinse with fresh water and allow to dry. Then sand the surface.
  • In poor condition: Remove all previous coatings and prime the surface.

Technical data
  • Processing temperature: +5 °C to max. 35 °C
  • Drying time at 15 °C: 3 hours
  • Processing time at 15 °C: min. 16 hours
GFK Farbe

GRP
Degrease with thinner No.100 or Super Cleaner. Thoroughly sand with 180-220 grit sandpaper. Clean well and allow to dry. Prime the surface with a suitable primer, such as One Up. Then apply 2-3 coats of Toplac Plus.

Weathered gelcoat
Due to increased porousness, the risk of solvent/moisture entrapment is increased, leading to potential blistering. To counter this risk, 3 coats of Interprotect must be applied to seal. When using Interprotect, Perfection undercoat must be applied before using the topcoat.

Holz Farbe

Wood / Plywood
Sand smooth with 80­180 grade paper. Remove sanding dust by brushing, dusting and wiping. Allow to dry completely before applying further products. Prime the surface with a suitable primer, such as One Up. Then apply 2-3 coats of Toplac Plus.

Steel paint

Steel
Degrease with thinner No.100 or Super Cleaner. Gritblast to near white metal surface (Sa 2½). If gritblasting is not possible, grind the metal surface with 36-40 abrasive discs to a uniform, clean, bright well roughened metal surface (50­75­microns) anchor pattern. Use angle grinder on small areas. Clean thoroughly and allow to dry. Prime the surface with a suitable primer, such as One Up. Then apply 2-3 coats of Toplac Plus.

Aluminium paint

Aluminium
Degrease with thinner No.100 or Super Cleaner. Thoroughly sand with 60-120 grit sandpaper (suitable for aluminum). Clean well and allow to dry. Prime as soon as possible (within 8 hours) with One UP. Then apply 2-3 coats of Toplac Plus.

Documents

de-flag Datasheet
PDF, 201,02 KB
de-flag Safety datasheet
PDF, 182,37 KB
de-flag Safety datasheet
PDF, 182,69 KB
de-flag Safety datasheet
PDF, 189,37 KB

What other SVB customers have to say

100% real reviews
Nobody has rated this product yet

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

No questions asked yet. Be the first to ask a question!