INTERNATIONAL

TOPLAC PLUS High Gloss One-Component Boat Paint

SVB price: €15.92 (€42.47 / l )
You save: 35%
€24.59
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
Only 2 in stock
Item no.
41437
EAN
5035686885554
Model no.
YLK000/375AZ
Description
INTERNATIONAL - TOPLAC PLUS
Finish
High gloss
No. of components
1 component
Method of application
Roller, Brush
No. of coats (recommended)
2 - 3
for substrate
GRP, Wood, Steel, Aluminium
Order within next 1 hrs 41 min, ships today!
 

Product details

TOPLAC PLUS one component premium boat paint is suitable for all boat materials above the waterline, and has improved aesthetics and flow in comparison with other conventional paints and excellent flow properties. Featuring a new formula, TOPLAC PLUS eliminates the need for tipping when using a roller. The high-gloss varnish also has excellent gloss retention qualities without yellowing. TOPLAC PLUS can be applied using a brush or roller and has improved flow and levelling. Suitable for a range of surfaces including aluminium, iron, carbon fibre, GRP, steel, lead, wood and stainless steel. Yield: 13.33 m²/litre. Suitable thinner: No.100.
Dilute 0-10% for easier processing. Above 25° C, add an additional 5% thinner.

Processing instructions:

For coated surfaces:
  • In good condition: Wash down with a suitable detergent, rinse with fresh water and allow to dry. Then sand the surface.
  • In poor condition: Remove all previous coatings and prime the surface.

Technical data
  • Processing temperature: +5 °C to max. 35 °C
  • Drying time at 15 °C: 3 hours
  • Processing time at 15 °C: min. 16 hours
GFK Farbe

GRP
Degrease with thinner No.100 or Super Cleaner. Thoroughly sand with 180-220 grit sandpaper. Clean well and allow to dry. Prime the surface with a suitable primer, such as One Up. Then apply 2-3 coats of Toplac Plus.

Weathered gelcoat
Due to increased porousness, the risk of solvent/moisture entrapment is increased, leading to potential blistering. To counter this risk, 3 coats of Interprotect must be applied to seal. When using Interprotect, Perfection undercoat must be applied before using the topcoat.

Holz Farbe

Wood / Plywood
Sand smooth with 80­180 grade paper. Remove sanding dust by brushing, dusting and wiping. Allow to dry completely before applying further products. Prime the surface with a suitable primer, such as One Up. Then apply 2-3 coats of Toplac Plus.


Steel paint

Steel
Degrease with thinner No.100 or Super Cleaner. Gritblast to near white metal surface (Sa 2½). If gritblasting is not possible, grind the metal surface with 36-40 abrasive discs to a uniform, clean, bright well roughened metal surface (50­75­microns) anchor pattern. Use angle grinder on small areas. Clean thoroughly and allow to dry. Prime the surface with a suitable primer, such as One Up. Then apply 2-3 coats of Toplac Plus.

Aluminium paint

Aluminium
Degrease with thinner No.100 or Super Cleaner. Thoroughly sand with 60-120 grit sandpaper (suitable for aluminum). Clean well and allow to dry. Prime as soon as possible (within 8 hours) with One UP. Then apply 2-3 coats of Toplac Plus.

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Warning
Hazard warnings
Flammable liquid and vapour.
May cause drowsiness or dizziness.
Harmful to aquatic life with long lasting effects.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Keep cool.
Dispose of contents/container to …
Avoid release to the environment.
Use personal protective equipment as required.
Obtain special instructions before use.
H226, H336, H412, P101, P102, P103, P280, P271, P210, P304+P340, P303+P361+P353, P235, P501, P273, P281, P201

Documents

de-flag Datasheet
PDF, 201,02 KB
de-flag Safety datasheet
PDF, 182,69 KB
Item no.: 41437,41436,41435
de-flag Safety datasheet
PDF, 189,37 KB
Item no.: 41443
de-flag Safety datasheet
PDF, 182,37 KB
Item no.: 41446

What other SVB customers have to say

100% real reviews

302 customer reviews

Alexandre G.
Flag of Portugal Verified purchase 41437
Top Quality
Very good quality. Simple to use and great finish
Gary M.
Flag of Ireland Verified purchase 41435
Grp repairs and paint systems
Nice paint, easy to use, great finish
Maciej Z.
Flag of Croatia Verified purchase 41170
Toplac for my mahogany boat
I've been using these paints for years. The best choice of all.
View all ratings

Rate product

How would you rate this product?
Disappointed
Completely fails to meet my expectations
Poor
Only some expectations are met
OK
Meets my basic expectations
Good
Slightly better than my general expectations
Excellent
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

No questions asked yet. Be the first to ask a question!