SVB recommends the following for this item
Product details
Processing instructions:
For coated surfaces:
Degrease surface with Super Cleaner and sand with 280-320 grit, clean and allow to dry.
For uncoated surfaces:
- Bare wood: Sand first with 80-180 grit then with 280 grit and remove dust. Then apply wood treatment and allow to dry.
Application: Thoroughly clean and degrease. Sand and rinse the substrate. Apply a total of 2-4 coats and sand with 320-400 grit after each coat.
For bare wood, apply the 1st coat of clear varnish diluted 10% with Thinner No. 1. Then apply 4-6 undiluted coats. After each coat, sand with 320-400 grit.
Drying time at 15° C: 2.5 hours
Processing time at 15° C: min. 14 hours
Processing temperature: +10 °C to max. 29° C
Product safety
Please note the following hazard warnings:
May cause an allergic skin reaction.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep cool.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN:
Take off contaminated clothing and wash before reuse.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Dispose of contents/container to …
Documents
Accessories
12/30/2013
Verified purchase
2/9/2023
Verified purchase
4/13/2022
Verified purchase
Customers also bought
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .