SVB recommends the following for these items
Product details
Processing instructions:
For coated surfaces:
- In good condition: Wash down with Super Cleaner, rinse with fresh water and allow to dry. Abrade with 280320 grade (grit) paper.
- In poor condition: Remove all previous coatings and prime the surface.
All surfaces: Apply a primer and allow to dry. Sand with 320-400 grit and remove dust residues. Then apply 2-3 coats of Perfection.
Aluminium: Prime the surface with Interprotect.
Steel: Prime the surface with Interprotect.
Wood: Prime the surface with Interprotect.
GRP: Wash down with Super Cleaner, rinse with fresh water and allow to dry. Then sand with 180-220 grit. Remove dust residues and apply 2-3 coats of Perfection. No priming necessary.
Old GRP: Wash with Super Cleaner, rinse with fresh water and allow to dry. Sand thoroughly with 180-220 grit sandpaper. Clean well and remove dust residues. To prevent blistering, apply 3 coats of Interprotect.
Drying time at 15 °C: 7 hours
Processing time at 15 °C: min. 14 hours
Processing temperature: +10 °C to max. 35 °C
Product safety
Please note the following hazard warnings:
May cause an allergic skin reaction.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep cool.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN:
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Take off contaminated clothing and wash before reuse.
Dispose of contents/container to …
Documents
Item no.: 40664
Item no.: 40093
Accessories
Customers also bought
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
-
-
Technical question
