INTERNATIONAL
PERFECTION PLUS Two-Component High-Gloss Clear Varnish
SVB recommends the following for these items
Product details
Processing instructions:
For coated surfaces:
Clean thoroughly and allow to dry. Sand with 320-400 grit and remove dust residues.
For uncoated surfaces:
- Bare wood: Sand first with 120 and 240 grit then with 320 grit and remove dust. Then seal with Fast Dry Clear Wood Sealer.
- Oily woods: Degrease the surface carefully with Thinner No. 9 and allow to dry. Then sand with 320 grit.
Application: Thoroughly clean and degrease. Sand and rinse the substrate. Then apply the first coat of clear varnish diluted by 10-25%. Then apply 3 undiluted coats.
Drying time at 15° C: 7 hours
Processing time at 15° C: min. 14 hours
Processing temperature: +10° C to max. 35° C
Product safety
Please note the following hazard warnings:
May cause an allergic skin reaction.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep cool.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN:
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Take off contaminated clothing and wash before reuse.
Dispose of contents/container to …
Avoid release to the environment.
Documents
Accessories
Customers also bought
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
-
