Reset image position
Item no. 41463
SVB price: €11.72 (€31.26 / l )
You save: 33%
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
6 left in stock
Item no.
Model no.
Order within next 1 hrs 25 min, ships today!

Product details

ONE UP is a one-component primer and undercoat - two products in one. Easy to apply by brush and roller, ONE UP provides and extra smooth finish. As a primer, it delivers impressive adhesion and protection. Can be painted over with any 1-component paint. Suitable for substrates made of wood, steel, aluminium, zinc and GRP. Yield: 10 m²/litre. Suitable thinner: No. 1. For easier application, can be thinned up to 10 % as desired.

Processing instructions
In good condition:
Wash down with a suitable detergent, rinse with fresh water and allow to dry. Abrade with 220­280 grade (grit) paper.
In poor condition: Remove all previous coatings.
Bare wood: Sand smooth with 80­180 grade paper. Remove sanding dust by brushing, dusting and wiping. Allow to dry completely before applying further products.

Steel: Degrease with solvent or Super Cleaner. Gritblast to Sa 2½ ­ near white metal surface. If gritblasting is not possible, grind the metal surface with 24­36 grit abrasive discs to a uniform, clean, bright well roughened metal surface 50­75­microns anchor pattern. Use angle grinder on small areas. Clean thoroughly and allow to dry.

Aluminium: : Degrease with solvent or Super Cleaner. Sand well using 24­120 grade (aluminium compatible) paper. Clean thoroughly.

Zink: : Degrease with solvent or Super Cleaner. Sand well using 60­120 grade (aluminium compatible) paper. Clean thoroughly.

GRP: : Degrease with solvent or Super Cleaner. Sand well using 180­220 grade (aluminium compatible) paper. Clean thoroughly.

Steel and aluminium: Apply 3 coats of the primer (unthinned).
GRP: Apply 2 coats (unthinned(.
Wood: Apply 4 coats (unthinned).

Drying time at 15° C: 3 hrs
Overcoating time at 15° C: at least 18 hours
Processing temperature: +5 °C to max. 35° C

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Hazard warnings
Flammable liquid and vapour.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep cool.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Dispose of contents/container to …
H226, P101, P102, P103, P210, P235, P280, P303+P361+P353, P501


de-flag Manual
PDF, 201,62 KB
de-flag Safety datasheet
PDF, 178,35 KB

What other SVB customers have to say

100% real reviews

5 customer reviews

Clive R.
Flag of France Verified purchase 41464
Clive R.
Flag of France 41465
Ralf B.
Flag of Germany Verified purchase 41465
Gute Farbe
I used the paint for priming my rudder blade above the waterline, it is very easy to work with. Sticks to the galvanized steel as it should, the Toplac Plus paint sticks well to One UP.
View all ratings

Rate product

How would you rate this product?
Completely fails to meet my expectations
Only some expectations are met
Meets my basic expectations
Slightly better than my general expectations
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Deutsch
No questions asked yet. Be the first to ask a question!