INTERNATIONAL INTERDECK Non-Slip Topcoat
Article Number
40684
EAN
5035686115729
Model no.
YJB000/750AR
Description
INTERNATIONAL - INTERDECK
Colour
White
Contents
750
ml
Yield (theoretical)
8.4
m²
Finish
Silk gloss
No. of components
1 component
Method of application
Roller, Brush
No. of coats (recommended)
1 - 2
For substrate
GRP, Wood, Steel, Aluminium
SVB recommends the following for these items
Product details
INTERDECK is an excellent, non-slip one-component deck coating. Tough polyurethane resins protect the deck against everyday wear and tear. Yield: 11.2 m²/litre. Thinner no.1.
For coated surfaces:
- In good condition: Wash down with a suitable detergent, rinse with fresh water and allow to dry. Abrade with 280320 grade (grit) paper.
- In poor condition: Remove all previous coatings and prime the surface.
All surfaces: Sand primer with 180-220 grit. Afterwards, remove dust residues from the surface and apply 1-2 coats of Interdeck.
Bare wood: Abrade with 80-180 grit sandpaper. Then with 280 grit paper. Remove sanding dust by brushing, dusting and wiping. Allow to dry completely.
Aluminium: : Degrease with solvent or Super Cleaner. Sand well using 24120 grade (aluminium compatible) paper. Clean thoroughly and allow to dry. Prime with One UP as soon as possible (within 8 hours).
Steel: Degrease with solvent or Super Cleaner.Gritblast to Sa 2½ near white metal surface. If gritblasting is not possible, grind the metal surface with 2436 grit abrasive discs to a uniform, clean, bright well roughened metal surface (5075microns) anchor pattern. Use angle grinder on small areas. Clean thoroughly and allow to dry and then apply primer.
GRP: Degrease with solvent or Super Cleaner. Sand well using 180220 grade paper. Clean thoroughly and allow to dry and apply primer.
Old / weathered gelcoat:Degrease with thinner or Super Cleaner. Thoroughly sand with 180-220 grit sandpaper. Clean well and allow to dry. To prevent blistering, apply 3 coats of a 2-component primer, then overcoat with a 2-component undercoat.
Drying time at 15 °C: 4 hours
Processing time at 15 °C: min. 20 hours
Processing temperature: +5 °C to max. 35 °C
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Flammable liquid and vapour.
May cause damage to organs through prolonged or repeated exposure.
May cause drowsiness or dizziness.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep cool.
Do not breathe dust/fume/gas/mist/vapours/spray.
Wear protective gloves/protective clothing/eye protection/face protection.
Get medical advice/attention if you feel unwell.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Dispose of contents/container to …
May cause damage to organs through prolonged or repeated exposure.
May cause drowsiness or dizziness.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep cool.
Do not breathe dust/fume/gas/mist/vapours/spray.
Wear protective gloves/protective clothing/eye protection/face protection.
Get medical advice/attention if you feel unwell.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Dispose of contents/container to …
H226, H373, H336, P101, P102, P103, P210, P235, P260, P280, P314, P303+P361+P353, P501
Documents
Accessories
-29%
INTERNATIONAL
NON-SLIP Aditive for Boat Paint
€11.26
only
€7
98
83
-38%
INTERNATIONAL
Thinner No.1
€28.39
only
€17
61
> 100
-29%
INTERNATIONAL
SUPER CLEANER
€14.24
only
€10
04
> 100
-32%
INTERNATIONAL
ONE UP 2-in-1 Primer and Undercoat
€18.37
from
€12
56
4 variants
3M
Painter's Tape 25 mm x 50 m
only
€11
72
> 100
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from
€2
48
2 variants
Varnishing Flat Brushes
from
€3
28
3 variants
PU Foam Radiator Roller
only
€0
67
> 100
-17%
Mini Polishing and Grinding Machine, battery-powered
€100.80
only
€83
99
Customers also bought
SIKA
Sikaflex - 291i Marine Sealant / Filler
from
€7
14
6 variants
-35%
INTERNATIONAL
PRIMOCON One-Component Primer and Barrier
€37.25
from
€24
33
2 variants
-38%
INTERNATIONAL
Thinner No.1
€28.39
only
€17
61
> 100
-8%
EPIFANES
MONO-URETHANE One-Component High Gloss Boat Paint
€34.70
from
€31
89
24 variants
EPIFANES
Paint Thinner
only
€15
08
84
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:
Igor Š.
asked
on Mar 22, 2024
Dear Sirs
Please let me know, if i can apply Interdeck ( International ) over OneUp or i have to apply after Toplack.
Best regards Igor
No answers yet. Be the first to answer this question!